* @author John Rose, JSR 292 EG * @since 1.7 */ public class MethodHandles { private MethodHandles() { } // do not instantiate // Android-changed: We do not use MemberName / MethodHandleImpl. // // private static final MemberName.Factory IMPL_NAMES = MemberName.getFactory(); // static { MethodHandleImpl.initStatics(); } // See IMPL_LOOKUP below. //// Method handle creation from ordinary methods. /** * Returns a {@link Lookup lookup object} with * full capabilities to emulate all supported bytecode behaviors of the caller. * These capabilities include private access to the caller. * Factory methods on the lookup object can create * direct method handles * for any member that the caller has access to via bytecodes, * including protected and private fields and methods. * This lookup object is a capability which may be delegated to trusted agents. * Do not store it in place where untrusted code can access it. *
* This method is caller sensitive, which means that it may return different * values to different callers. *
* For any given caller class {@code C}, the lookup object returned by this call * has equivalent capabilities to any lookup object * supplied by the JVM to the bootstrap method of an * invokedynamic instruction * executing in the same caller class {@code C}. * @return a lookup object for the caller of this method, with private access */ // Android-changed: Remove caller sensitive. // @CallerSensitive public static Lookup lookup() { return new Lookup(Reflection.getCallerClass()); } /** * Returns a {@link Lookup lookup object} which is trusted minimally. * It can only be used to create method handles to * publicly accessible fields and methods. *
* As a matter of pure convention, the {@linkplain Lookup#lookupClass lookup class} * of this lookup object will be {@link java.lang.Object}. * *
* Discussion: * The lookup class can be changed to any other class {@code C} using an expression of the form * {@link Lookup#in publicLookup().in(C.class)}. * Since all classes have equal access to public names, * such a change would confer no new access rights. * A public lookup object is always subject to * security manager checks. * Also, it cannot access * caller sensitive methods. * @return a lookup object which is trusted minimally */ public static Lookup publicLookup() { return Lookup.PUBLIC_LOOKUP; } // Android-removed: Documentation related to the security manager and module checks /** * Returns a {@link Lookup lookup object} with full capabilities to emulate all * supported bytecode behaviors, including * private access, on a target class. * @param targetClass the target class * @param lookup the caller lookup object * @return a lookup object for the target class, with private access * @throws IllegalArgumentException if {@code targetClass} is a primitive type or array class * @throws NullPointerException if {@code targetClass} or {@code caller} is {@code null} * @throws IllegalAccessException is not thrown on Android * @since 9 */ public static Lookup privateLookupIn(Class targetClass, Lookup lookup) throws IllegalAccessException { // Android-removed: SecurityManager calls // SecurityManager sm = System.getSecurityManager(); // if (sm != null) sm.checkPermission(ACCESS_PERMISSION); if (targetClass.isPrimitive()) throw new IllegalArgumentException(targetClass + " is a primitive class"); if (targetClass.isArray()) throw new IllegalArgumentException(targetClass + " is an array class"); // BEGIN Android-removed: There is no module information on Android /** * Module targetModule = targetClass.getModule(); * Module callerModule = lookup.lookupClass().getModule(); * if (!callerModule.canRead(targetModule)) * throw new IllegalAccessException(callerModule + " does not read " + targetModule); * if (targetModule.isNamed()) { * String pn = targetClass.getPackageName(); * assert pn.length() > 0 : "unnamed package cannot be in named module"; * if (!targetModule.isOpen(pn, callerModule)) * throw new IllegalAccessException(targetModule + " does not open " + pn + " to " + callerModule); * } * if ((lookup.lookupModes() & Lookup.MODULE) == 0) * throw new IllegalAccessException("lookup does not have MODULE lookup mode"); * if (!callerModule.isNamed() && targetModule.isNamed()) { * IllegalAccessLogger logger = IllegalAccessLogger.illegalAccessLogger(); * if (logger != null) { * logger.logIfOpenedForIllegalAccess(lookup, targetClass); * } * } */ // END Android-removed: There is no module information on Android return new Lookup(targetClass); } /** * Performs an unchecked "crack" of a * direct method handle. * The result is as if the user had obtained a lookup object capable enough * to crack the target method handle, called * {@link java.lang.invoke.MethodHandles.Lookup#revealDirect Lookup.revealDirect} * on the target to obtain its symbolic reference, and then called * {@link java.lang.invoke.MethodHandleInfo#reflectAs MethodHandleInfo.reflectAs} * to resolve the symbolic reference to a member. *
* If there is a security manager, its {@code checkPermission} method
* is called with a {@code ReflectPermission("suppressAccessChecks")} permission.
* @param
* A lookup class which needs to create method handles will call
* {@link #lookup MethodHandles.lookup} to create a factory for itself.
* When the {@code Lookup} factory object is created, the identity of the lookup class is
* determined, and securely stored in the {@code Lookup} object.
* The lookup class (or its delegates) may then use factory methods
* on the {@code Lookup} object to create method handles for access-checked members.
* This includes all methods, constructors, and fields which are allowed to the lookup class,
* even private ones.
*
*
* In cases where the given member is of variable arity (i.e., a method or constructor)
* the returned method handle will also be of {@linkplain MethodHandle#asVarargsCollector variable arity}.
* In all other cases, the returned method handle will be of fixed arity.
*
* Discussion:
* The equivalence between looked-up method handles and underlying
* class members and bytecode behaviors
* can break down in a few ways:
*
* All access checks start from a {@code Lookup} object, which
* compares its recorded lookup class against all requests to
* create method handles.
* A single {@code Lookup} object can be used to create any number
* of access-checked method handles, all checked against a single
* lookup class.
*
* A {@code Lookup} object can be shared with other trusted code,
* such as a metaobject protocol.
* A shared {@code Lookup} object delegates the capability
* to create method handles on private members of the lookup class.
* Even if privileged code uses the {@code Lookup} object,
* the access checking is confined to the privileges of the
* original lookup class.
*
* A lookup can fail, because
* the containing class is not accessible to the lookup class, or
* because the desired class member is missing, or because the
* desired class member is not accessible to the lookup class, or
* because the lookup object is not trusted enough to access the member.
* In any of these cases, a {@code ReflectiveOperationException} will be
* thrown from the attempted lookup. The exact class will be one of
* the following:
*
* In general, the conditions under which a method handle may be
* looked up for a method {@code M} are no more restrictive than the conditions
* under which the lookup class could have compiled, verified, and resolved a call to {@code M}.
* Where the JVM would raise exceptions like {@code NoSuchMethodError},
* a method handle lookup will generally raise a corresponding
* checked exception, such as {@code NoSuchMethodException}.
* And the effect of invoking the method handle resulting from the lookup
* is exactly equivalent
* to executing the compiled, verified, and resolved call to {@code M}.
* The same point is true of fields and constructors.
*
* Discussion:
* Access checks only apply to named and reflected methods,
* constructors, and fields.
* Other method handle creation methods, such as
* {@link MethodHandle#asType MethodHandle.asType},
* do not require any access checks, and are used
* independently of any {@code Lookup} object.
*
* If the desired member is {@code protected}, the usual JVM rules apply,
* including the requirement that the lookup class must be either be in the
* same package as the desired member, or must inherit that member.
* (See the Java Virtual Machine Specification, sections 4.9.2, 5.4.3.5, and 6.4.)
* In addition, if the desired member is a non-static field or method
* in a different package, the resulting method handle may only be applied
* to objects of the lookup class or one of its subclasses.
* This requirement is enforced by narrowing the type of the leading
* {@code this} parameter from {@code C}
* (which will necessarily be a superclass of the lookup class)
* to the lookup class itself.
*
* The JVM imposes a similar requirement on {@code invokespecial} instruction,
* that the receiver argument must match both the resolved method and
* the current class. Again, this requirement is enforced by narrowing the
* type of the leading parameter to the resulting method handle.
* (See the Java Virtual Machine Specification, section 4.10.1.9.)
*
* The JVM represents constructors and static initializer blocks as internal methods
* with special names ({@code "
* In some cases, access between nested classes is obtained by the Java compiler by creating
* an wrapper method to access a private method of another class
* in the same top-level declaration.
* For example, a nested class {@code C.D}
* can access private members within other related classes such as
* {@code C}, {@code C.D.E}, or {@code C.B},
* but the Java compiler may need to generate wrapper methods in
* those related classes. In such cases, a {@code Lookup} object on
* {@code C.E} would be unable to those private members.
* A workaround for this limitation is the {@link Lookup#in Lookup.in} method,
* which can transform a lookup on {@code C.E} into one on any of those other
* classes, without special elevation of privilege.
*
* The accesses permitted to a given lookup object may be limited,
* according to its set of {@link #lookupModes lookupModes},
* to a subset of members normally accessible to the lookup class.
* For example, the {@link #publicLookup publicLookup}
* method produces a lookup object which is only allowed to access
* public members in public classes.
* The caller sensitive method {@link #lookup lookup}
* produces a lookup object with full capabilities relative to
* its caller class, to emulate all supported bytecode behaviors.
* Also, the {@link Lookup#in Lookup.in} method may produce a lookup object
* with fewer access modes than the original lookup object.
*
*
*
* Discussion of private access:
* We say that a lookup has private access
* if its {@linkplain #lookupModes lookup modes}
* include the possibility of accessing {@code private} members.
* As documented in the relevant methods elsewhere,
* only lookups with private access possess the following capabilities:
*
* Each of these permissions is a consequence of the fact that a lookup object
* with private access can be securely traced back to an originating class,
* whose bytecode behaviors and Java language access permissions
* can be reliably determined and emulated by method handles.
*
*
* If a security manager is present, member lookups are subject to
* additional checks.
* From one to three calls are made to the security manager.
* Any of these calls can refuse access by throwing a
* {@link java.lang.SecurityException SecurityException}.
* Define {@code smgr} as the security manager,
* {@code lookc} as the lookup class of the current lookup object,
* {@code refc} as the containing class in which the member
* is being sought, and {@code defc} as the class in which the
* member is actually defined.
* The value {@code lookc} is defined as not present
* if the current lookup object does not have
* private access.
* The calls are made according to the following rules:
*
* If a method handle for a caller-sensitive method is requested,
* the general rules for bytecode behaviors apply,
* but they take account of the lookup class in a special way.
* The resulting method handle behaves as if it were called
* from an instruction contained in the lookup class,
* so that the caller-sensitive method detects the lookup class.
* (By contrast, the invoker of the method handle is disregarded.)
* Thus, in the case of caller-sensitive methods,
* different lookup classes may give rise to
* differently behaving method handles.
*
* In cases where the lookup object is
* {@link #publicLookup publicLookup()},
* or some other lookup object without
* private access,
* the lookup class is disregarded.
* In such cases, no caller-sensitive method handle can be created,
* access is forbidden, and the lookup fails with an
* {@code IllegalAccessException}.
*
* Discussion:
* For example, the caller-sensitive method
* {@link java.lang.Class#forName(String) Class.forName(x)}
* can return varying classes or throw varying exceptions,
* depending on the class loader of the class that calls it.
* A public lookup of {@code Class.forName} will fail, because
* there is no reasonable way to determine its bytecode behavior.
*
* If an application caches method handles for broad sharing,
* it should use {@code publicLookup()} to create them.
* If there is a lookup of {@code Class.forName}, it will fail,
* and the application must take appropriate action in that case.
* It may be that a later lookup, perhaps during the invocation of a
* bootstrap method, can incorporate the specific identity
* of the caller, making the method accessible.
*
* The function {@code MethodHandles.lookup} is caller sensitive
* so that there can be a secure foundation for lookups.
* Nearly all other methods in the JSR 292 API rely on lookup
* objects to check access requests.
*/
// Android-changed: Change link targets from MethodHandles#[public]Lookup to
// #[public]Lookup to work around complaints from javadoc.
public static final
class Lookup {
/** The class on behalf of whom the lookup is being performed. */
/* @NonNull */ private final Class lookupClass;
/** The allowed sorts of members which may be looked up (PUBLIC, etc.). */
private final int allowedModes;
/** A single-bit mask representing {@code public} access,
* which may contribute to the result of {@link #lookupModes lookupModes}.
* The value, {@code 0x01}, happens to be the same as the value of the
* {@code public} {@linkplain java.lang.reflect.Modifier#PUBLIC modifier bit}.
*/
public static final int PUBLIC = Modifier.PUBLIC;
/** A single-bit mask representing {@code private} access,
* which may contribute to the result of {@link #lookupModes lookupModes}.
* The value, {@code 0x02}, happens to be the same as the value of the
* {@code private} {@linkplain java.lang.reflect.Modifier#PRIVATE modifier bit}.
*/
public static final int PRIVATE = Modifier.PRIVATE;
/** A single-bit mask representing {@code protected} access,
* which may contribute to the result of {@link #lookupModes lookupModes}.
* The value, {@code 0x04}, happens to be the same as the value of the
* {@code protected} {@linkplain java.lang.reflect.Modifier#PROTECTED modifier bit}.
*/
public static final int PROTECTED = Modifier.PROTECTED;
/** A single-bit mask representing {@code package} access (default access),
* which may contribute to the result of {@link #lookupModes lookupModes}.
* The value is {@code 0x08}, which does not correspond meaningfully to
* any particular {@linkplain java.lang.reflect.Modifier modifier bit}.
*/
public static final int PACKAGE = Modifier.STATIC;
private static final int ALL_MODES = (PUBLIC | PRIVATE | PROTECTED | PACKAGE);
// Android-note: Android has no notion of a trusted lookup. If required, such lookups
// are performed by the runtime. As a result, we always use lookupClass, which will always
// be non-null in our implementation.
//
// private static final int TRUSTED = -1;
private static int fixmods(int mods) {
mods &= (ALL_MODES - PACKAGE);
return (mods != 0) ? mods : PACKAGE;
}
/** Tells which class is performing the lookup. It is this class against
* which checks are performed for visibility and access permissions.
*
* The class implies a maximum level of access permission,
* but the permissions may be additionally limited by the bitmask
* {@link #lookupModes lookupModes}, which controls whether non-public members
* can be accessed.
* @return the lookup class, on behalf of which this lookup object finds members
*/
public Class lookupClass() {
return lookupClass;
}
/** Tells which access-protection classes of members this lookup object can produce.
* The result is a bit-mask of the bits
* {@linkplain #PUBLIC PUBLIC (0x01)},
* {@linkplain #PRIVATE PRIVATE (0x02)},
* {@linkplain #PROTECTED PROTECTED (0x04)},
* and {@linkplain #PACKAGE PACKAGE (0x08)}.
*
* A freshly-created lookup object
* on the {@linkplain java.lang.invoke.MethodHandles#lookup() caller's class}
* has all possible bits set, since the caller class can access all its own members.
* A lookup object on a new lookup class
* {@linkplain java.lang.invoke.MethodHandles.Lookup#in created from a previous lookup object}
* may have some mode bits set to zero.
* The purpose of this is to restrict access via the new lookup object,
* so that it can access only names which can be reached by the original
* lookup object, and also by the new lookup class.
* @return the lookup modes, which limit the kinds of access performed by this lookup object
*/
public int lookupModes() {
return allowedModes & ALL_MODES;
}
/** Embody the current class (the lookupClass) as a lookup class
* for method handle creation.
* Must be called by from a method in this package,
* which in turn is called by a method not in this package.
*/
Lookup(Class lookupClass) {
this(lookupClass, ALL_MODES);
// make sure we haven't accidentally picked up a privileged class:
checkUnprivilegedlookupClass(lookupClass, ALL_MODES);
}
private Lookup(Class lookupClass, int allowedModes) {
this.lookupClass = lookupClass;
this.allowedModes = allowedModes;
}
/**
* Creates a lookup on the specified new lookup class.
* The resulting object will report the specified
* class as its own {@link #lookupClass lookupClass}.
*
* However, the resulting {@code Lookup} object is guaranteed
* to have no more access capabilities than the original.
* In particular, access capabilities can be lost as follows:
* (It may seem strange that protected access should be
* stronger than private access. Viewed independently from
* package access, protected access is the first to be lost,
* because it requires a direct subclass relationship between
* caller and callee.)
* @see #in
*/
@Override
public String toString() {
String cname = lookupClass.getName();
switch (allowedModes) {
case 0: // no privileges
return cname + "/noaccess";
case PUBLIC:
return cname + "/public";
case PUBLIC|PACKAGE:
return cname + "/package";
case ALL_MODES & ~PROTECTED:
return cname + "/private";
case ALL_MODES:
return cname;
// Android-changed: No support for TRUSTED callers.
// case TRUSTED:
// return "/trusted"; // internal only; not exported
default: // Should not happen, but it's a bitfield...
cname = cname + "/" + Integer.toHexString(allowedModes);
assert(false) : cname;
return cname;
}
}
/**
* Produces a method handle for a static method.
* The type of the method handle will be that of the method.
* (Since static methods do not take receivers, there is no
* additional receiver argument inserted into the method handle type,
* as there would be with {@link #findVirtual findVirtual} or {@link #findSpecial findSpecial}.)
* The method and all its argument types must be accessible to the lookup object.
*
* The returned method handle will have
* {@linkplain MethodHandle#asVarargsCollector variable arity} if and only if
* the method's variable arity modifier bit ({@code 0x0080}) is set.
*
* If the returned method handle is invoked, the method's class will
* be initialized, if it has not already been initialized.
* Example:
*
* When called, the handle will treat the first argument as a receiver
* and dispatch on the receiver's type to determine which method
* implementation to enter.
* (The dispatching action is identical with that performed by an
* {@code invokevirtual} or {@code invokeinterface} instruction.)
*
* The first argument will be of type {@code refc} if the lookup
* class has full privileges to access the member. Otherwise
* the member must be {@code protected} and the first argument
* will be restricted in type to the lookup class.
*
* The returned method handle will have
* {@linkplain MethodHandle#asVarargsCollector variable arity} if and only if
* the method's variable arity modifier bit ({@code 0x0080}) is set.
*
* Because of the general equivalence between {@code invokevirtual}
* instructions and method handles produced by {@code findVirtual},
* if the class is {@code MethodHandle} and the name string is
* {@code invokeExact} or {@code invoke}, the resulting
* method handle is equivalent to one produced by
* {@link java.lang.invoke.MethodHandles#exactInvoker MethodHandles.exactInvoker} or
* {@link java.lang.invoke.MethodHandles#invoker MethodHandles.invoker}
* with the same {@code type} argument.
*
* Example:
*
* The requested type must have a return type of {@code void}.
* (This is consistent with the JVM's treatment of constructor type descriptors.)
*
* The returned method handle will have
* {@linkplain MethodHandle#asVarargsCollector variable arity} if and only if
* the constructor's variable arity modifier bit ({@code 0x0080}) is set.
*
* If the returned method handle is invoked, the constructor's class will
* be initialized, if it has not already been initialized.
* Example:
*
* The lookup context here is determined by the {@linkplain #lookupClass() lookup class},
* its class loader, and the {@linkplain #lookupModes() lookup modes}.
*
* @param targetName the fully qualified name of the class to be looked up.
* @return the requested class.
* @throws SecurityException if a security manager is present and it
* refuses access
* @throws LinkageError if the linkage fails
* @throws ClassNotFoundException if the class cannot be loaded by the lookup class' loader.
* @throws IllegalAccessException if the class is not accessible, using the allowed access
* modes.
* @throws NullPointerException if {@code targetName} is null
* @since 9
* @jvms 5.4.3.1 Class and Interface Resolution
* @hide
*/
public Class findClass(String targetName) throws ClassNotFoundException, IllegalAccessException {
Class targetClass = Class.forName(targetName, false, lookupClass.getClassLoader());
return accessClass(targetClass);
}
// END Android-added: Add findClass(String) from OpenJDK 17. http://b/270028670
private MethodHandle createMethodHandleForConstructor(Constructor constructor) {
Class refc = constructor.getDeclaringClass();
MethodType constructorType =
MethodType.methodType(refc, constructor.getParameterTypes());
MethodHandle mh;
if (refc == String.class) {
// String constructors have optimized StringFactory methods
// that matches returned type. These factory methods combine the
// memory allocation and initialization calls for String objects.
mh = new MethodHandleImpl(constructor.getArtMethod(), MethodHandle.INVOKE_DIRECT,
constructorType);
} else {
// Constructors for all other classes use a Construct transformer to perform
// their memory allocation and call to
* If {@code targetClass} is in the same module as the lookup class,
* the lookup class is {@code LC} in module {@code M1} and
* the previous lookup class is in module {@code M0} or
* {@code null} if not present,
* {@code targetClass} is accessible if and only if one of the following is true:
*
* Otherwise, if this lookup has {@link #UNCONDITIONAL} access, this lookup
* can access public types in all modules when the type is in a package
* that is exported unconditionally.
*
* Otherwise, {@code targetClass} is in a different module from {@code lookupClass},
* and if this lookup does not have {@code PUBLIC} access, {@code lookupClass}
* is inaccessible.
*
* Otherwise, if this lookup has no {@linkplain #previousLookupClass() previous lookup class},
* {@code M1} is the module containing {@code lookupClass} and
* {@code M2} is the module containing {@code targetClass},
* then {@code targetClass} is accessible if and only if
*
* Otherwise, if this lookup has a {@linkplain #previousLookupClass() previous lookup class},
* {@code M1} and {@code M2} are as before, and {@code M0} is the module
* containing the previous lookup class, then {@code targetClass} is accessible
* if and only if one of the following is true:
*
* Otherwise, {@code targetClass} is not accessible.
*
* @param targetClass the class to be access-checked
* @return the class that has been access-checked
* @throws IllegalAccessException if the class is not accessible from the lookup class
* and previous lookup class, if present, using the allowed access modes.
* @throws SecurityException if a security manager is present and it
* refuses access
* @throws NullPointerException if {@code targetClass} is {@code null}
* @since 9
* @see Cross-module lookups
* @hide
*/
public Class accessClass(Class targetClass) throws IllegalAccessException {
if (!isClassAccessible(targetClass)) {
throw makeAccessException(targetClass);
}
// Android-removed: SecurityManager is unnecessary on Android.
// checkSecurityManager(targetClass);
return targetClass;
}
boolean isClassAccessible(Class refc) {
Objects.requireNonNull(refc);
Class caller = lookupClassOrNull();
Class type = refc;
while (type.isArray()) {
type = type.getComponentType();
}
// Android-removed: Remove prevLookupClass until supported by Lookup in OpenJDK 17.
// return caller == null || VerifyAccess.isClassAccessible(type, caller, prevLookupClass, allowedModes);
return caller == null || VerifyAccess.isClassAccessible(type, caller, allowedModes);
}
// This is just for calling out to MethodHandleImpl.
private Class lookupClassOrNull() {
// Android-changed: Android always returns lookupClass and has no concept of TRUSTED.
// return (allowedModes == TRUSTED) ? null : lookupClass;
return lookupClass;
}
// END Android-added: Add accessClass(Class) from OpenJDK 17. http://b/270028670
/**
* Produces an early-bound method handle for a virtual method.
* It will bypass checks for overriding methods on the receiver,
* as if called from an {@code invokespecial}
* instruction from within the explicitly specified {@code specialCaller}.
* The type of the method handle will be that of the method,
* with a suitably restricted receiver type prepended.
* (The receiver type will be {@code specialCaller} or a subtype.)
* The method and all its argument types must be accessible
* to the lookup object.
*
* Before method resolution,
* if the explicitly specified caller class is not identical with the
* lookup class, or if this lookup object does not have
* private access
* privileges, the access fails.
*
* The returned method handle will have
* {@linkplain MethodHandle#asVarargsCollector variable arity} if and only if
* the method's variable arity modifier bit ({@code 0x0080}) is set.
*
* (Note: JVM internal methods named {@code " Example:
*
* Access checking is performed immediately on behalf of the lookup
* class.
*
* Certain access modes of the returned VarHandle are unsupported under
* the following conditions:
*
* If the field is declared {@code volatile} then the returned VarHandle
* will override access to the field (effectively ignore the
* {@code volatile} declaration) in accordance to its specified
* access modes.
*
* If the field type is {@code float} or {@code double} then numeric
* and atomic update access modes compare values using their bitwise
* representation (see {@link Float#floatToRawIntBits} and
* {@link Double#doubleToRawLongBits}, respectively).
* @apiNote
* Bitwise comparison of {@code float} values or {@code double} values,
* as performed by the numeric and atomic update access modes, differ
* from the primitive {@code ==} operator and the {@link Float#equals}
* and {@link Double#equals} methods, specifically with respect to
* comparing NaN values or comparing {@code -0.0} with {@code +0.0}.
* Care should be taken when performing a compare and set or a compare
* and exchange operation with such values since the operation may
* unexpectedly fail.
* There are many possible NaN values that are considered to be
* {@code NaN} in Java, although no IEEE 754 floating-point operation
* provided by Java can distinguish between them. Operation failure can
* occur if the expected or witness value is a NaN value and it is
* transformed (perhaps in a platform specific manner) into another NaN
* value, and thus has a different bitwise representation (see
* {@link Float#intBitsToFloat} or {@link Double#longBitsToDouble} for more
* details).
* The values {@code -0.0} and {@code +0.0} have different bitwise
* representations but are considered equal when using the primitive
* {@code ==} operator. Operation failure can occur if, for example, a
* numeric algorithm computes an expected value to be say {@code -0.0}
* and previously computed the witness value to be say {@code +0.0}.
* @param recv the receiver class, of type {@code R}, that declares the
* non-static field
* @param name the field's name
* @param type the field's type, of type {@code T}
* @return a VarHandle giving access to non-static fields.
* @throws NoSuchFieldException if the field does not exist
* @throws IllegalAccessException if access checking fails, or if the field is {@code static}
* @exception SecurityException if a security manager is present and it
* refuses access
* @throws NullPointerException if any argument is null
* @since 9
*/
public VarHandle findVarHandle(Class recv, String name, Class type) throws NoSuchFieldException, IllegalAccessException {
final Field field = findFieldOfType(recv, name, type);
final boolean isStatic = false;
final boolean performAccessChecks = true;
commonFieldChecks(field, recv, type, isStatic, performAccessChecks);
return FieldVarHandle.create(field);
}
// END Android-changed: OpenJDK 9+181 VarHandle API factory method.
// BEGIN Android-added: Common field resolution and access check methods.
private Field findFieldOfType(final Class refc, String name, Class type)
throws NoSuchFieldException {
Field field = null;
// Search refc and super classes for the field.
for (Class cls = refc; cls != null; cls = cls.getSuperclass()) {
try {
field = cls.getDeclaredField(name);
break;
} catch (NoSuchFieldException e) {
}
}
if (field == null) {
// Force failure citing refc.
field = refc.getDeclaredField(name);
}
final Class fieldType = field.getType();
if (fieldType != type) {
throw new NoSuchFieldException(name);
}
return field;
}
private void commonFieldChecks(Field field, Class refc, Class type,
boolean isStatic, boolean performAccessChecks)
throws IllegalAccessException {
final int modifiers = field.getModifiers();
if (performAccessChecks) {
checkAccess(refc, field.getDeclaringClass(), modifiers, field.getName());
}
if (Modifier.isStatic(modifiers) != isStatic) {
String reason = "Field " + field + " is " +
(isStatic ? "not " : "") + "static";
throw new IllegalAccessException(reason);
}
}
// END Android-added: Common field resolution and access check methods.
/**
* Produces a method handle giving read access to a static field.
* The type of the method handle will have a return type of the field's
* value type.
* The method handle will take no arguments.
* Access checking is performed immediately on behalf of the lookup class.
*
* If the returned method handle is invoked, the field's class will
* be initialized, if it has not already been initialized.
* @param refc the class or interface from which the method is accessed
* @param name the field's name
* @param type the field's type
* @return a method handle which can load values from the field
* @throws NoSuchFieldException if the field does not exist
* @throws IllegalAccessException if access checking fails, or if the field is not {@code static}
* @exception SecurityException if a security manager is present and it
* refuses access
* @throws NullPointerException if any argument is null
*/
public MethodHandle findStaticGetter(Class refc, String name, Class type) throws NoSuchFieldException, IllegalAccessException {
return findAccessor(refc, name, type, MethodHandle.SGET);
}
/**
* Produces a method handle giving write access to a static field.
* The type of the method handle will have a void return type.
* The method handle will take a single
* argument, of the field's value type, the value to be stored.
* Access checking is performed immediately on behalf of the lookup class.
*
* If the returned method handle is invoked, the field's class will
* be initialized, if it has not already been initialized.
* @param refc the class or interface from which the method is accessed
* @param name the field's name
* @param type the field's type
* @return a method handle which can store values into the field
* @throws NoSuchFieldException if the field does not exist
* @throws IllegalAccessException if access checking fails, or if the field is not {@code static}
* @exception SecurityException if a security manager is present and it
* refuses access
* @throws NullPointerException if any argument is null
*/
public MethodHandle findStaticSetter(Class refc, String name, Class type) throws NoSuchFieldException, IllegalAccessException {
return findAccessor(refc, name, type, MethodHandle.SPUT);
}
// BEGIN Android-changed: OpenJDK 9+181 VarHandle API factory method.
/**
* Produces a VarHandle giving access to a static field {@code name} of
* type {@code type} declared in a class of type {@code decl}.
* The VarHandle's variable type is {@code type} and it has no
* coordinate types.
*
* Access checking is performed immediately on behalf of the lookup
* class.
*
* If the returned VarHandle is operated on, the declaring class will be
* initialized, if it has not already been initialized.
*
* Certain access modes of the returned VarHandle are unsupported under
* the following conditions:
*
* If the field is declared {@code volatile} then the returned VarHandle
* will override access to the field (effectively ignore the
* {@code volatile} declaration) in accordance to its specified
* access modes.
*
* If the field type is {@code float} or {@code double} then numeric
* and atomic update access modes compare values using their bitwise
* representation (see {@link Float#floatToRawIntBits} and
* {@link Double#doubleToRawLongBits}, respectively).
* @apiNote
* Bitwise comparison of {@code float} values or {@code double} values,
* as performed by the numeric and atomic update access modes, differ
* from the primitive {@code ==} operator and the {@link Float#equals}
* and {@link Double#equals} methods, specifically with respect to
* comparing NaN values or comparing {@code -0.0} with {@code +0.0}.
* Care should be taken when performing a compare and set or a compare
* and exchange operation with such values since the operation may
* unexpectedly fail.
* There are many possible NaN values that are considered to be
* {@code NaN} in Java, although no IEEE 754 floating-point operation
* provided by Java can distinguish between them. Operation failure can
* occur if the expected or witness value is a NaN value and it is
* transformed (perhaps in a platform specific manner) into another NaN
* value, and thus has a different bitwise representation (see
* {@link Float#intBitsToFloat} or {@link Double#longBitsToDouble} for more
* details).
* The values {@code -0.0} and {@code +0.0} have different bitwise
* representations but are considered equal when using the primitive
* {@code ==} operator. Operation failure can occur if, for example, a
* numeric algorithm computes an expected value to be say {@code -0.0}
* and previously computed the witness value to be say {@code +0.0}.
* @param decl the class that declares the static field
* @param name the field's name
* @param type the field's type, of type {@code T}
* @return a VarHandle giving access to a static field
* @throws NoSuchFieldException if the field does not exist
* @throws IllegalAccessException if access checking fails, or if the field is not {@code static}
* @exception SecurityException if a security manager is present and it
* refuses access
* @throws NullPointerException if any argument is null
* @since 9
*/
public VarHandle findStaticVarHandle(Class decl, String name, Class type) throws NoSuchFieldException, IllegalAccessException {
final Field field = findFieldOfType(decl, name, type);
final boolean isStatic = true;
final boolean performAccessChecks = true;
commonFieldChecks(field, decl, type, isStatic, performAccessChecks);
return StaticFieldVarHandle.create(field);
}
// END Android-changed: OpenJDK 9+181 VarHandle API factory method.
/**
* Produces an early-bound method handle for a non-static method.
* The receiver must have a supertype {@code defc} in which a method
* of the given name and type is accessible to the lookup class.
* The method and all its argument types must be accessible to the lookup object.
* The type of the method handle will be that of the method,
* without any insertion of an additional receiver parameter.
* The given receiver will be bound into the method handle,
* so that every call to the method handle will invoke the
* requested method on the given receiver.
*
* The returned method handle will have
* {@linkplain MethodHandle#asVarargsCollector variable arity} if and only if
* the method's variable arity modifier bit ({@code 0x0080}) is set
* and the trailing array argument is not the only argument.
* (If the trailing array argument is the only argument,
* the given receiver value will be bound to it.)
*
* This is equivalent to the following code:
*
* The returned method handle will have
* {@linkplain MethodHandle#asVarargsCollector variable arity} if and only if
* the method's variable arity modifier bit ({@code 0x0080}) is set.
*
* If m is static, and
* if the returned method handle is invoked, the method's class will
* be initialized, if it has not already been initialized.
* @param m the reflected method
* @return a method handle which can invoke the reflected method
* @throws IllegalAccessException if access checking fails
* or if the method's variable arity modifier bit
* is set and {@code asVarargsCollector} fails
* @throws NullPointerException if the argument is null
*/
public MethodHandle unreflect(Method m) throws IllegalAccessException {
if (m == null) {
throw new NullPointerException("m == null");
}
MethodType methodType = MethodType.methodType(m.getReturnType(),
m.getParameterTypes());
// We should only perform access checks if setAccessible hasn't been called yet.
if (!m.isAccessible()) {
checkAccess(m.getDeclaringClass(), m.getDeclaringClass(), m.getModifiers(),
m.getName());
}
if (Modifier.isStatic(m.getModifiers())) {
return createMethodHandle(m, MethodHandle.INVOKE_STATIC, methodType);
} else {
methodType = methodType.insertParameterTypes(0, m.getDeclaringClass());
return createMethodHandle(m, MethodHandle.INVOKE_VIRTUAL, methodType);
}
}
/**
* Produces a method handle for a reflected method.
* It will bypass checks for overriding methods on the receiver,
* as if called from an {@code invokespecial}
* instruction from within the explicitly specified {@code specialCaller}.
* The type of the method handle will be that of the method,
* with a suitably restricted receiver type prepended.
* (The receiver type will be {@code specialCaller} or a subtype.)
* If the method's {@code accessible} flag is not set,
* access checking is performed immediately on behalf of the lookup class,
* as if {@code invokespecial} instruction were being linked.
*
* Before method resolution,
* if the explicitly specified caller class is not identical with the
* lookup class, or if this lookup object does not have
* private access
* privileges, the access fails.
*
* The returned method handle will have
* {@linkplain MethodHandle#asVarargsCollector variable arity} if and only if
* the method's variable arity modifier bit ({@code 0x0080}) is set.
* @param m the reflected method
* @param specialCaller the class nominally calling the method
* @return a method handle which can invoke the reflected method
* @throws IllegalAccessException if access checking fails
* or if the method's variable arity modifier bit
* is set and {@code asVarargsCollector} fails
* @throws NullPointerException if any argument is null
*/
public MethodHandle unreflectSpecial(Method m, Class specialCaller) throws IllegalAccessException {
if (m == null) {
throw new NullPointerException("m == null");
}
if (specialCaller == null) {
throw new NullPointerException("specialCaller == null");
}
if (!m.isAccessible()) {
// Android-changed: Match Java language 9 behavior where unreflectSpecial continues
// to require exact caller lookupClass match.
checkSpecialCaller(specialCaller, null);
}
final MethodType methodType = MethodType.methodType(m.getReturnType(),
m.getParameterTypes());
return findSpecial(m, methodType, m.getDeclaringClass() /* refc */, specialCaller);
}
/**
* Produces a method handle for a reflected constructor.
* The type of the method handle will be that of the constructor,
* with the return type changed to the declaring class.
* The method handle will perform a {@code newInstance} operation,
* creating a new instance of the constructor's class on the
* arguments passed to the method handle.
*
* If the constructor's {@code accessible} flag is not set,
* access checking is performed immediately on behalf of the lookup class.
*
* The returned method handle will have
* {@linkplain MethodHandle#asVarargsCollector variable arity} if and only if
* the constructor's variable arity modifier bit ({@code 0x0080}) is set.
*
* If the returned method handle is invoked, the constructor's class will
* be initialized, if it has not already been initialized.
* @param c the reflected constructor
* @return a method handle which can invoke the reflected constructor
* @throws IllegalAccessException if access checking fails
* or if the method's variable arity modifier bit
* is set and {@code asVarargsCollector} fails
* @throws NullPointerException if the argument is null
*/
public MethodHandle unreflectConstructor(Constructor c) throws IllegalAccessException {
if (c == null) {
throw new NullPointerException("c == null");
}
if (!c.isAccessible()) {
checkAccess(c.getDeclaringClass(), c.getDeclaringClass(), c.getModifiers(),
c.getName());
}
return createMethodHandleForConstructor(c);
}
/**
* Produces a method handle giving read access to a reflected field.
* The type of the method handle will have a return type of the field's
* value type.
* If the field is static, the method handle will take no arguments.
* Otherwise, its single argument will be the instance containing
* the field.
* If the field's {@code accessible} flag is not set,
* access checking is performed immediately on behalf of the lookup class.
*
* If the field is static, and
* if the returned method handle is invoked, the field's class will
* be initialized, if it has not already been initialized.
* @param f the reflected field
* @return a method handle which can load values from the reflected field
* @throws IllegalAccessException if access checking fails
* @throws NullPointerException if the argument is null
*/
public MethodHandle unreflectGetter(Field f) throws IllegalAccessException {
return findAccessor(f, f.getDeclaringClass(), f.getType(),
Modifier.isStatic(f.getModifiers()) ? MethodHandle.SGET : MethodHandle.IGET,
!f.isAccessible() /* performAccessChecks */);
}
/**
* Produces a method handle giving write access to a reflected field.
* The type of the method handle will have a void return type.
* If the field is static, the method handle will take a single
* argument, of the field's value type, the value to be stored.
* Otherwise, the two arguments will be the instance containing
* the field, and the value to be stored.
* If the field's {@code accessible} flag is not set,
* access checking is performed immediately on behalf of the lookup class.
*
* If the field is static, and
* if the returned method handle is invoked, the field's class will
* be initialized, if it has not already been initialized.
* @param f the reflected field
* @return a method handle which can store values into the reflected field
* @throws IllegalAccessException if access checking fails
* @throws NullPointerException if the argument is null
*/
public MethodHandle unreflectSetter(Field f) throws IllegalAccessException {
return findAccessor(f, f.getDeclaringClass(), f.getType(),
Modifier.isStatic(f.getModifiers()) ? MethodHandle.SPUT : MethodHandle.IPUT,
!f.isAccessible() /* performAccessChecks */);
}
// BEGIN Android-changed: OpenJDK 9+181 VarHandle API factory method.
/**
* Produces a VarHandle giving access to a reflected field {@code f}
* of type {@code T} declared in a class of type {@code R}.
* The VarHandle's variable type is {@code T}.
* If the field is non-static the VarHandle has one coordinate type,
* {@code R}. Otherwise, the field is static, and the VarHandle has no
* coordinate types.
*
* Access checking is performed immediately on behalf of the lookup
* class, regardless of the value of the field's {@code accessible}
* flag.
*
* If the field is static, and if the returned VarHandle is operated
* on, the field's declaring class will be initialized, if it has not
* already been initialized.
*
* Certain access modes of the returned VarHandle are unsupported under
* the following conditions:
*
* If the field is declared {@code volatile} then the returned VarHandle
* will override access to the field (effectively ignore the
* {@code volatile} declaration) in accordance to its specified
* access modes.
*
* If the field type is {@code float} or {@code double} then numeric
* and atomic update access modes compare values using their bitwise
* representation (see {@link Float#floatToRawIntBits} and
* {@link Double#doubleToRawLongBits}, respectively).
* @apiNote
* Bitwise comparison of {@code float} values or {@code double} values,
* as performed by the numeric and atomic update access modes, differ
* from the primitive {@code ==} operator and the {@link Float#equals}
* and {@link Double#equals} methods, specifically with respect to
* comparing NaN values or comparing {@code -0.0} with {@code +0.0}.
* Care should be taken when performing a compare and set or a compare
* and exchange operation with such values since the operation may
* unexpectedly fail.
* There are many possible NaN values that are considered to be
* {@code NaN} in Java, although no IEEE 754 floating-point operation
* provided by Java can distinguish between them. Operation failure can
* occur if the expected or witness value is a NaN value and it is
* transformed (perhaps in a platform specific manner) into another NaN
* value, and thus has a different bitwise representation (see
* {@link Float#intBitsToFloat} or {@link Double#longBitsToDouble} for more
* details).
* The values {@code -0.0} and {@code +0.0} have different bitwise
* representations but are considered equal when using the primitive
* {@code ==} operator. Operation failure can occur if, for example, a
* numeric algorithm computes an expected value to be say {@code -0.0}
* and previously computed the witness value to be say {@code +0.0}.
* @param f the reflected field, with a field of type {@code T}, and
* a declaring class of type {@code R}
* @return a VarHandle giving access to non-static fields or a static
* field
* @throws IllegalAccessException if access checking fails
* @throws NullPointerException if the argument is null
* @since 9
*/
public VarHandle unreflectVarHandle(Field f) throws IllegalAccessException {
final boolean isStatic = Modifier.isStatic(f.getModifiers());
final boolean performAccessChecks = true;
commonFieldChecks(f, f.getDeclaringClass(), f.getType(), isStatic, performAccessChecks);
return isStatic ? StaticFieldVarHandle.create(f) : FieldVarHandle.create(f);
}
// END Android-changed: OpenJDK 9+181 VarHandle API factory method.
/**
* Cracks a direct method handle
* created by this lookup object or a similar one.
* Security and access checks are performed to ensure that this lookup object
* is capable of reproducing the target method handle.
* This means that the cracking may fail if target is a direct method handle
* but was created by an unrelated lookup object.
* This can happen if the method handle is caller sensitive
* and was created by a lookup object for a different class.
* @param target a direct method handle to crack into symbolic reference components
* @return a symbolic reference which can be used to reconstruct this method handle from this lookup object
* @exception SecurityException if a security manager is present and it
* refuses access
* @throws IllegalArgumentException if the target is not a direct method handle or if access checking fails
* @exception NullPointerException if the target is {@code null}
* @see MethodHandleInfo
* @since 1.8
*/
public MethodHandleInfo revealDirect(MethodHandle target) {
MethodHandleImpl directTarget = getMethodHandleImpl(target);
MethodHandleInfo info = directTarget.reveal();
try {
checkAccess(lookupClass(), info.getDeclaringClass(), info.getModifiers(),
info.getName());
} catch (IllegalAccessException exception) {
throw new IllegalArgumentException("Unable to access memeber.", exception);
}
return info;
}
private boolean hasPrivateAccess() {
return (allowedModes & PRIVATE) != 0;
}
/** Check public/protected/private bits on the symbolic reference class and its member. */
void checkAccess(Class refc, Class defc, int mods, String methName)
throws IllegalAccessException {
int allowedModes = this.allowedModes;
if (Modifier.isProtected(mods) &&
defc == Object.class &&
"clone".equals(methName) &&
refc.isArray()) {
// The JVM does this hack also.
// (See ClassVerifier::verify_invoke_instructions
// and LinkResolver::check_method_accessability.)
// Because the JVM does not allow separate methods on array types,
// there is no separate method for int[].clone.
// All arrays simply inherit Object.clone.
// But for access checking logic, we make Object.clone
// (normally protected) appear to be public.
// Later on, when the DirectMethodHandle is created,
// its leading argument will be restricted to the
// requested array type.
// N.B. The return type is not adjusted, because
// that is *not* the bytecode behavior.
mods ^= Modifier.PROTECTED | Modifier.PUBLIC;
}
if (Modifier.isProtected(mods) && Modifier.isConstructor(mods)) {
// cannot "new" a protected ctor in a different package
mods ^= Modifier.PROTECTED;
}
if (Modifier.isPublic(mods) && Modifier.isPublic(refc.getModifiers()) && allowedModes != 0)
return; // common case
int requestedModes = fixmods(mods); // adjust 0 => PACKAGE
if ((requestedModes & allowedModes) != 0) {
if (VerifyAccess.isMemberAccessible(refc, defc, mods, lookupClass(), allowedModes))
return;
} else {
// Protected members can also be checked as if they were package-private.
if ((requestedModes & PROTECTED) != 0 && (allowedModes & PACKAGE) != 0
&& VerifyAccess.isSamePackage(defc, lookupClass()))
return;
}
throwMakeAccessException(accessFailedMessage(refc, defc, mods), this);
}
String accessFailedMessage(Class refc, Class defc, int mods) {
// check the class first:
boolean classOK = (Modifier.isPublic(defc.getModifiers()) &&
(defc == refc ||
Modifier.isPublic(refc.getModifiers())));
if (!classOK && (allowedModes & PACKAGE) != 0) {
classOK = (VerifyAccess.isClassAccessible(defc, lookupClass(), ALL_MODES) &&
(defc == refc ||
VerifyAccess.isClassAccessible(refc, lookupClass(), ALL_MODES)));
}
if (!classOK)
return "class is not public";
if (Modifier.isPublic(mods))
return "access to public member failed"; // (how?)
if (Modifier.isPrivate(mods))
return "member is private";
if (Modifier.isProtected(mods))
return "member is protected";
return "member is private to package";
}
// Android-changed: checkSpecialCaller assumes that ALLOW_NESTMATE_ACCESS = false,
// as in upstream OpenJDK.
//
// private static final boolean ALLOW_NESTMATE_ACCESS = false;
// Android-changed: Match java language 9 behavior allowing special access if the reflected
// class (called 'refc', the class from which the method is being accessed) is an interface
// and is implemented by the caller.
private void checkSpecialCaller(Class specialCaller, Class refc) throws IllegalAccessException {
// Android-changed: No support for TRUSTED lookups. Also construct the
// IllegalAccessException by hand because the upstream code implicitly assumes
// that the lookupClass == specialCaller.
//
// if (allowedModes == TRUSTED) return;
boolean isInterfaceLookup = (refc != null &&
refc.isInterface() &&
refc.isAssignableFrom(specialCaller));
if (!hasPrivateAccess() || (specialCaller != lookupClass() && !isInterfaceLookup)) {
throw new IllegalAccessException("no private access for invokespecial : "
+ specialCaller + ", from" + this);
}
}
private void throwMakeAccessException(String message, Object from) throws
IllegalAccessException{
message = message + ": "+ toString();
if (from != null) message += ", from " + from;
throw new IllegalAccessException(message);
}
private void checkReturnType(Method method, MethodType methodType)
throws NoSuchMethodException {
if (method.getReturnType() != methodType.rtype()) {
throw new NoSuchMethodException(method.getName() + methodType);
}
}
}
/**
* "Cracks" {@code target} to reveal the underlying {@code MethodHandleImpl}.
*/
private static MethodHandleImpl getMethodHandleImpl(MethodHandle target) {
// Special case : We implement handles to constructors as transformers,
// so we must extract the underlying handle from the transformer.
if (target instanceof Transformers.Construct) {
target = ((Transformers.Construct) target).getConstructorHandle();
}
// Special case: Var-args methods are also implemented as Transformers,
// so we should get the underlying handle in that case as well.
if (target instanceof Transformers.VarargsCollector) {
target = target.asFixedArity();
}
if (target instanceof MethodHandleImpl) {
return (MethodHandleImpl) target;
}
throw new IllegalArgumentException(target + " is not a direct handle");
}
// Android-removed: unsupported @jvms tag in doc-comment.
/**
* Produces a method handle constructing arrays of a desired type,
* as if by the {@code anewarray} bytecode.
* The return type of the method handle will be the array type.
* The type of its sole argument will be {@code int}, which specifies the size of the array.
*
* If the returned method handle is invoked with a negative
* array size, a {@code NegativeArraySizeException} will be thrown.
*
* @param arrayClass an array type
* @return a method handle which can create arrays of the given type
* @throws NullPointerException if the argument is {@code null}
* @throws IllegalArgumentException if {@code arrayClass} is not an array type
* @see java.lang.reflect.Array#newInstance(Class, int)
* @since 9
*/
public static
MethodHandle arrayConstructor(Class arrayClass) throws IllegalArgumentException {
if (!arrayClass.isArray()) {
throw newIllegalArgumentException("not an array class: " + arrayClass.getName());
}
// Android-changed: transformer based implementation.
// MethodHandle ani = MethodHandleImpl.getConstantHandle(MethodHandleImpl.MH_Array_newInstance).
// bindTo(arrayClass.getComponentType());
// return ani.asType(ani.type().changeReturnType(arrayClass))
return new Transformers.ArrayConstructor(arrayClass);
}
// Android-removed: unsupported @jvms tag in doc-comment.
/**
* Produces a method handle returning the length of an array,
* as if by the {@code arraylength} bytecode.
* The type of the method handle will have {@code int} as return type,
* and its sole argument will be the array type.
*
* If the returned method handle is invoked with a {@code null}
* array reference, a {@code NullPointerException} will be thrown.
*
* @param arrayClass an array type
* @return a method handle which can retrieve the length of an array of the given array type
* @throws NullPointerException if the argument is {@code null}
* @throws IllegalArgumentException if arrayClass is not an array type
* @since 9
*/
public static
MethodHandle arrayLength(Class arrayClass) throws IllegalArgumentException {
// Android-changed: transformer based implementation.
// return MethodHandleImpl.makeArrayElementAccessor(arrayClass, MethodHandleImpl.ArrayAccess.LENGTH);
if (!arrayClass.isArray()) {
throw newIllegalArgumentException("not an array class: " + arrayClass.getName());
}
return new Transformers.ArrayLength(arrayClass);
}
// BEGIN Android-added: method to check if a class is an array.
private static void checkClassIsArray(Class c) {
if (!c.isArray()) {
throw new IllegalArgumentException("Not an array type: " + c);
}
}
private static void checkTypeIsViewable(Class componentType) {
if (componentType == short.class ||
componentType == char.class ||
componentType == int.class ||
componentType == long.class ||
componentType == float.class ||
componentType == double.class) {
return;
}
throw new UnsupportedOperationException("Component type not supported: " + componentType);
}
// END Android-added: method to check if a class is an array.
/**
* Produces a method handle giving read access to elements of an array.
* The type of the method handle will have a return type of the array's
* element type. Its first argument will be the array type,
* and the second will be {@code int}.
* @param arrayClass an array type
* @return a method handle which can load values from the given array type
* @throws NullPointerException if the argument is null
* @throws IllegalArgumentException if arrayClass is not an array type
*/
public static
MethodHandle arrayElementGetter(Class arrayClass) throws IllegalArgumentException {
checkClassIsArray(arrayClass);
final Class componentType = arrayClass.getComponentType();
if (componentType.isPrimitive()) {
try {
return Lookup.PUBLIC_LOOKUP.findStatic(MethodHandles.class,
"arrayElementGetter",
MethodType.methodType(componentType, arrayClass, int.class));
} catch (NoSuchMethodException | IllegalAccessException exception) {
throw new AssertionError(exception);
}
}
return new Transformers.ReferenceArrayElementGetter(arrayClass);
}
/** @hide */ public static byte arrayElementGetter(byte[] array, int i) { return array[i]; }
/** @hide */ public static boolean arrayElementGetter(boolean[] array, int i) { return array[i]; }
/** @hide */ public static char arrayElementGetter(char[] array, int i) { return array[i]; }
/** @hide */ public static short arrayElementGetter(short[] array, int i) { return array[i]; }
/** @hide */ public static int arrayElementGetter(int[] array, int i) { return array[i]; }
/** @hide */ public static long arrayElementGetter(long[] array, int i) { return array[i]; }
/** @hide */ public static float arrayElementGetter(float[] array, int i) { return array[i]; }
/** @hide */ public static double arrayElementGetter(double[] array, int i) { return array[i]; }
/**
* Produces a method handle giving write access to elements of an array.
* The type of the method handle will have a void return type.
* Its last argument will be the array's element type.
* The first and second arguments will be the array type and int.
* @param arrayClass the class of an array
* @return a method handle which can store values into the array type
* @throws NullPointerException if the argument is null
* @throws IllegalArgumentException if arrayClass is not an array type
*/
public static
MethodHandle arrayElementSetter(Class arrayClass) throws IllegalArgumentException {
checkClassIsArray(arrayClass);
final Class componentType = arrayClass.getComponentType();
if (componentType.isPrimitive()) {
try {
return Lookup.PUBLIC_LOOKUP.findStatic(MethodHandles.class,
"arrayElementSetter",
MethodType.methodType(void.class, arrayClass, int.class, componentType));
} catch (NoSuchMethodException | IllegalAccessException exception) {
throw new AssertionError(exception);
}
}
return new Transformers.ReferenceArrayElementSetter(arrayClass);
}
/** @hide */
public static void arrayElementSetter(byte[] array, int i, byte val) { array[i] = val; }
/** @hide */
public static void arrayElementSetter(boolean[] array, int i, boolean val) { array[i] = val; }
/** @hide */
public static void arrayElementSetter(char[] array, int i, char val) { array[i] = val; }
/** @hide */
public static void arrayElementSetter(short[] array, int i, short val) { array[i] = val; }
/** @hide */
public static void arrayElementSetter(int[] array, int i, int val) { array[i] = val; }
/** @hide */
public static void arrayElementSetter(long[] array, int i, long val) { array[i] = val; }
/** @hide */
public static void arrayElementSetter(float[] array, int i, float val) { array[i] = val; }
/** @hide */
public static void arrayElementSetter(double[] array, int i, double val) { array[i] = val; }
// BEGIN Android-changed: OpenJDK 9+181 VarHandle API factory methods.
/**
* Produces a VarHandle giving access to elements of an array of type
* {@code arrayClass}. The VarHandle's variable type is the component type
* of {@code arrayClass} and the list of coordinate types is
* {@code (arrayClass, int)}, where the {@code int} coordinate type
* corresponds to an argument that is an index into an array.
*
* Certain access modes of the returned VarHandle are unsupported under
* the following conditions:
*
* If the component type is {@code float} or {@code double} then numeric
* and atomic update access modes compare values using their bitwise
* representation (see {@link Float#floatToRawIntBits} and
* {@link Double#doubleToRawLongBits}, respectively).
* @apiNote
* Bitwise comparison of {@code float} values or {@code double} values,
* as performed by the numeric and atomic update access modes, differ
* from the primitive {@code ==} operator and the {@link Float#equals}
* and {@link Double#equals} methods, specifically with respect to
* comparing NaN values or comparing {@code -0.0} with {@code +0.0}.
* Care should be taken when performing a compare and set or a compare
* and exchange operation with such values since the operation may
* unexpectedly fail.
* There are many possible NaN values that are considered to be
* {@code NaN} in Java, although no IEEE 754 floating-point operation
* provided by Java can distinguish between them. Operation failure can
* occur if the expected or witness value is a NaN value and it is
* transformed (perhaps in a platform specific manner) into another NaN
* value, and thus has a different bitwise representation (see
* {@link Float#intBitsToFloat} or {@link Double#longBitsToDouble} for more
* details).
* The values {@code -0.0} and {@code +0.0} have different bitwise
* representations but are considered equal when using the primitive
* {@code ==} operator. Operation failure can occur if, for example, a
* numeric algorithm computes an expected value to be say {@code -0.0}
* and previously computed the witness value to be say {@code +0.0}.
* @param arrayClass the class of an array, of type {@code T[]}
* @return a VarHandle giving access to elements of an array
* @throws NullPointerException if the arrayClass is null
* @throws IllegalArgumentException if arrayClass is not an array type
* @since 9
*/
public static
VarHandle arrayElementVarHandle(Class arrayClass) throws IllegalArgumentException {
checkClassIsArray(arrayClass);
return ArrayElementVarHandle.create(arrayClass);
}
/**
* Produces a VarHandle giving access to elements of a {@code byte[]} array
* viewed as if it were a different primitive array type, such as
* {@code int[]} or {@code long[]}.
* The VarHandle's variable type is the component type of
* {@code viewArrayClass} and the list of coordinate types is
* {@code (byte[], int)}, where the {@code int} coordinate type
* corresponds to an argument that is an index into a {@code byte[]} array.
* The returned VarHandle accesses bytes at an index in a {@code byte[]}
* array, composing bytes to or from a value of the component type of
* {@code viewArrayClass} according to the given endianness.
*
* The supported component types (variables types) are {@code short},
* {@code char}, {@code int}, {@code long}, {@code float} and
* {@code double}.
*
* Access of bytes at a given index will result in an
* {@code IndexOutOfBoundsException} if the index is less than {@code 0}
* or greater than the {@code byte[]} array length minus the size (in bytes)
* of {@code T}.
*
* Access of bytes at an index may be aligned or misaligned for {@code T},
* with respect to the underlying memory address, {@code A} say, associated
* with the array and index.
* If access is misaligned then access for anything other than the
* {@code get} and {@code set} access modes will result in an
* {@code IllegalStateException}. In such cases atomic access is only
* guaranteed with respect to the largest power of two that divides the GCD
* of {@code A} and the size (in bytes) of {@code T}.
* If access is aligned then following access modes are supported and are
* guaranteed to support atomic access:
*
* Misaligned access, and therefore atomicity guarantees, may be determined
* for {@code byte[]} arrays without operating on a specific array. Given
* an {@code index}, {@code T} and it's corresponding boxed type,
* {@code T_BOX}, misalignment may be determined as follows:
*
* If the variable type is {@code float} or {@code double} then atomic
* update access modes compare values using their bitwise representation
* (see {@link Float#floatToRawIntBits} and
* {@link Double#doubleToRawLongBits}, respectively).
* @param viewArrayClass the view array class, with a component type of
* type {@code T}
* @param byteOrder the endianness of the view array elements, as
* stored in the underlying {@code byte} array
* @return a VarHandle giving access to elements of a {@code byte[]} array
* viewed as if elements corresponding to the components type of the view
* array class
* @throws NullPointerException if viewArrayClass or byteOrder is null
* @throws IllegalArgumentException if viewArrayClass is not an array type
* @throws UnsupportedOperationException if the component type of
* viewArrayClass is not supported as a variable type
* @since 9
*/
public static
VarHandle byteArrayViewVarHandle(Class viewArrayClass,
ByteOrder byteOrder) throws IllegalArgumentException {
checkClassIsArray(viewArrayClass);
checkTypeIsViewable(viewArrayClass.getComponentType());
return ByteArrayViewVarHandle.create(viewArrayClass, byteOrder);
}
/**
* Produces a VarHandle giving access to elements of a {@code ByteBuffer}
* viewed as if it were an array of elements of a different primitive
* component type to that of {@code byte}, such as {@code int[]} or
* {@code long[]}.
* The VarHandle's variable type is the component type of
* {@code viewArrayClass} and the list of coordinate types is
* {@code (ByteBuffer, int)}, where the {@code int} coordinate type
* corresponds to an argument that is an index into a {@code byte[]} array.
* The returned VarHandle accesses bytes at an index in a
* {@code ByteBuffer}, composing bytes to or from a value of the component
* type of {@code viewArrayClass} according to the given endianness.
*
* The supported component types (variables types) are {@code short},
* {@code char}, {@code int}, {@code long}, {@code float} and
* {@code double}.
*
* Access will result in a {@code ReadOnlyBufferException} for anything
* other than the read access modes if the {@code ByteBuffer} is read-only.
*
* Access of bytes at a given index will result in an
* {@code IndexOutOfBoundsException} if the index is less than {@code 0}
* or greater than the {@code ByteBuffer} limit minus the size (in bytes) of
* {@code T}.
*
* Access of bytes at an index may be aligned or misaligned for {@code T},
* with respect to the underlying memory address, {@code A} say, associated
* with the {@code ByteBuffer} and index.
* If access is misaligned then access for anything other than the
* {@code get} and {@code set} access modes will result in an
* {@code IllegalStateException}. In such cases atomic access is only
* guaranteed with respect to the largest power of two that divides the GCD
* of {@code A} and the size (in bytes) of {@code T}.
* If access is aligned then following access modes are supported and are
* guaranteed to support atomic access:
*
* Misaligned access, and therefore atomicity guarantees, may be determined
* for a {@code ByteBuffer}, {@code bb} (direct or otherwise), an
* {@code index}, {@code T} and it's corresponding boxed type,
* {@code T_BOX}, as follows:
*
* If the variable type is {@code float} or {@code double} then atomic
* update access modes compare values using their bitwise representation
* (see {@link Float#floatToRawIntBits} and
* {@link Double#doubleToRawLongBits}, respectively).
* @param viewArrayClass the view array class, with a component type of
* type {@code T}
* @param byteOrder the endianness of the view array elements, as
* stored in the underlying {@code ByteBuffer} (Note this overrides the
* endianness of a {@code ByteBuffer})
* @return a VarHandle giving access to elements of a {@code ByteBuffer}
* viewed as if elements corresponding to the components type of the view
* array class
* @throws NullPointerException if viewArrayClass or byteOrder is null
* @throws IllegalArgumentException if viewArrayClass is not an array type
* @throws UnsupportedOperationException if the component type of
* viewArrayClass is not supported as a variable type
* @since 9
*/
public static
VarHandle byteBufferViewVarHandle(Class viewArrayClass,
ByteOrder byteOrder) throws IllegalArgumentException {
checkClassIsArray(viewArrayClass);
checkTypeIsViewable(viewArrayClass.getComponentType());
return ByteBufferViewVarHandle.create(viewArrayClass, byteOrder);
}
// END Android-changed: OpenJDK 9+181 VarHandle API factory methods.
/// method handle invocation (reflective style)
/**
* Produces a method handle which will invoke any method handle of the
* given {@code type}, with a given number of trailing arguments replaced by
* a single trailing {@code Object[]} array.
* The resulting invoker will be a method handle with the following
* arguments:
*
* The invoker will invoke its target like a call to {@link MethodHandle#invoke invoke} with
* the indicated {@code type}.
* That is, if the target is exactly of the given {@code type}, it will behave
* like {@code invokeExact}; otherwise it behave as if {@link MethodHandle#asType asType}
* is used to convert the target to the required {@code type}.
*
* The type of the returned invoker will not be the given {@code type}, but rather
* will have all parameters except the first {@code leadingArgCount}
* replaced by a single array of type {@code Object[]}, which will be
* the final parameter.
*
* Before invoking its target, the invoker will spread the final array, apply
* reference casts as necessary, and unbox and widen primitive arguments.
* If, when the invoker is called, the supplied array argument does
* not have the correct number of elements, the invoker will throw
* an {@link IllegalArgumentException} instead of invoking the target.
*
* This method is equivalent to the following code (though it may be more efficient):
*
* This method is equivalent to the following code (though it may be more efficient):
* {@code publicLookup().findVirtual(MethodHandle.class, "invokeExact", type)}
*
*
* Discussion:
* Invoker method handles can be useful when working with variable method handles
* of unknown types.
* For example, to emulate an {@code invokeExact} call to a variable method
* handle {@code M}, extract its type {@code T},
* look up the invoker method {@code X} for {@code T},
* and call the invoker method, as {@code X.invoke(T, A...)}.
* (It would not work to call {@code X.invokeExact}, since the type {@code T}
* is unknown.)
* If spreading, collecting, or other argument transformations are required,
* they can be applied once to the invoker {@code X} and reused on many {@code M}
* method handle values, as long as they are compatible with the type of {@code X}.
*
* (Note: The invoker method is not available via the Core Reflection API.
* An attempt to call {@linkplain java.lang.reflect.Method#invoke java.lang.reflect.Method.invoke}
* on the declared {@code invokeExact} or {@code invoke} method will raise an
* {@link java.lang.UnsupportedOperationException UnsupportedOperationException}.)
*
* This method throws no reflective or security exceptions.
* @param type the desired target type
* @return a method handle suitable for invoking any method handle of the given type
* @throws IllegalArgumentException if the resulting method handle's type would have
* too many parameters
*/
static public
MethodHandle exactInvoker(MethodType type) {
return new Transformers.Invoker(type, true /* isExactInvoker */);
}
/**
* Produces a special invoker method handle which can be used to
* invoke any method handle compatible with the given type, as if by {@link MethodHandle#invoke invoke}.
* The resulting invoker will have a type which is
* exactly equal to the desired type, except that it will accept
* an additional leading argument of type {@code MethodHandle}.
*
* Before invoking its target, if the target differs from the expected type,
* the invoker will apply reference casts as
* necessary and box, unbox, or widen primitive values, as if by {@link MethodHandle#asType asType}.
* Similarly, the return value will be converted as necessary.
* If the target is a {@linkplain MethodHandle#asVarargsCollector variable arity method handle},
* the required arity conversion will be made, again as if by {@link MethodHandle#asType asType}.
*
* This method is equivalent to the following code (though it may be more efficient):
* {@code publicLookup().findVirtual(MethodHandle.class, "invoke", type)}
*
* Discussion:
* A {@linkplain MethodType#genericMethodType general method type} is one which
* mentions only {@code Object} arguments and return values.
* An invoker for such a type is capable of calling any method handle
* of the same arity as the general type.
*
* (Note: The invoker method is not available via the Core Reflection API.
* An attempt to call {@linkplain java.lang.reflect.Method#invoke java.lang.reflect.Method.invoke}
* on the declared {@code invokeExact} or {@code invoke} method will raise an
* {@link java.lang.UnsupportedOperationException UnsupportedOperationException}.)
*
* This method throws no reflective or security exceptions.
* @param type the desired target type
* @return a method handle suitable for invoking any method handle convertible to the given type
* @throws IllegalArgumentException if the resulting method handle's type would have
* too many parameters
*/
static public
MethodHandle invoker(MethodType type) {
return new Transformers.Invoker(type, false /* isExactInvoker */);
}
// BEGIN Android-added: resolver for VarHandle accessor methods.
static private MethodHandle methodHandleForVarHandleAccessor(VarHandle.AccessMode accessMode,
MethodType type,
boolean isExactInvoker) {
Class refc = VarHandle.class;
Method method;
try {
method = refc.getDeclaredMethod(accessMode.methodName(), Object[].class);
} catch (NoSuchMethodException e) {
throw new InternalError("No method for AccessMode " + accessMode, e);
}
MethodType methodType = type.insertParameterTypes(0, VarHandle.class);
int kind = isExactInvoker ? MethodHandle.INVOKE_VAR_HANDLE_EXACT
: MethodHandle.INVOKE_VAR_HANDLE;
return new MethodHandleImpl(method.getArtMethod(), kind, methodType);
}
// END Android-added: resolver for VarHandle accessor methods.
/**
* Produces a special invoker method handle which can be used to
* invoke a signature-polymorphic access mode method on any VarHandle whose
* associated access mode type is compatible with the given type.
* The resulting invoker will have a type which is exactly equal to the
* desired given type, except that it will accept an additional leading
* argument of type {@code VarHandle}.
*
* @param accessMode the VarHandle access mode
* @param type the desired target type
* @return a method handle suitable for invoking an access mode method of
* any VarHandle whose access mode type is of the given type.
* @since 9
*/
static public
MethodHandle varHandleExactInvoker(VarHandle.AccessMode accessMode, MethodType type) {
return methodHandleForVarHandleAccessor(accessMode, type, true /* isExactInvoker */);
}
/**
* Produces a special invoker method handle which can be used to
* invoke a signature-polymorphic access mode method on any VarHandle whose
* associated access mode type is compatible with the given type.
* The resulting invoker will have a type which is exactly equal to the
* desired given type, except that it will accept an additional leading
* argument of type {@code VarHandle}.
*
* Before invoking its target, if the access mode type differs from the
* desired given type, the invoker will apply reference casts as necessary
* and box, unbox, or widen primitive values, as if by
* {@link MethodHandle#asType asType}. Similarly, the return value will be
* converted as necessary.
*
* This method is equivalent to the following code (though it may be more
* efficient): {@code publicLookup().findVirtual(VarHandle.class, accessMode.name(), type)}
*
* @param accessMode the VarHandle access mode
* @param type the desired target type
* @return a method handle suitable for invoking an access mode method of
* any VarHandle whose access mode type is convertible to the given
* type.
* @since 9
*/
static public
MethodHandle varHandleInvoker(VarHandle.AccessMode accessMode, MethodType type) {
return methodHandleForVarHandleAccessor(accessMode, type, false /* isExactInvoker */);
}
// Android-changed: Basic invokers are not supported.
//
// static /*non-public*/
// MethodHandle basicInvoker(MethodType type) {
// return type.invokers().basicInvoker();
// }
/// method handle modification (creation from other method handles)
/**
* Produces a method handle which adapts the type of the
* given method handle to a new type by pairwise argument and return type conversion.
* The original type and new type must have the same number of arguments.
* The resulting method handle is guaranteed to report a type
* which is equal to the desired new type.
*
* If the original type and new type are equal, returns target.
*
* The same conversions are allowed as for {@link MethodHandle#asType MethodHandle.asType},
* and some additional conversions are also applied if those conversions fail.
* Given types T0, T1, one of the following conversions is applied
* if possible, before or instead of any conversions done by {@code asType}:
*
* The given array controls the reordering.
* Call {@code #I} the number of incoming parameters (the value
* {@code newType.parameterCount()}, and call {@code #O} the number
* of outgoing parameters (the value {@code target.type().parameterCount()}).
* Then the length of the reordering array must be {@code #O},
* and each element must be a non-negative number less than {@code #I}.
* For every {@code N} less than {@code #O}, the {@code N}-th
* outgoing argument will be taken from the {@code I}-th incoming
* argument, where {@code I} is {@code reorder[N]}.
*
* No argument or return value conversions are applied.
* The type of each incoming argument, as determined by {@code newType},
* must be identical to the type of the corresponding outgoing parameter
* or parameters in the target method handle.
* The return type of {@code newType} must be identical to the return
* type of the original target.
*
* The reordering array need not specify an actual permutation.
* An incoming argument will be duplicated if its index appears
* more than once in the array, and an incoming argument will be dropped
* if its index does not appear in the array.
* As in the case of {@link #dropArguments(MethodHandle,int,List) dropArguments},
* incoming arguments which are not mentioned in the reordering array
* are may be any type, as determined only by {@code newType}.
*
* Before the method handle is returned, the passed-in value is converted to the requested type.
* If the requested type is primitive, widening primitive conversions are attempted,
* else reference conversions are attempted.
* The returned method handle is equivalent to {@code identity(type).bindTo(value)}.
* @param type the return type of the desired method handle
* @param value the value to return
* @return a method handle of the given return type and no arguments, which always returns the given value
* @throws NullPointerException if the {@code type} argument is null
* @throws ClassCastException if the value cannot be converted to the required return type
* @throws IllegalArgumentException if the given type is {@code void.class}
*/
public static
MethodHandle constant(Class type, Object value) {
if (type.isPrimitive()) {
if (type == void.class)
throw newIllegalArgumentException("void type");
Wrapper w = Wrapper.forPrimitiveType(type);
value = w.convert(value, type);
if (w.zero().equals(value))
return zero(w, type);
return insertArguments(identity(type), 0, value);
} else {
if (value == null)
return zero(Wrapper.OBJECT, type);
return identity(type).bindTo(value);
}
}
/**
* Produces a method handle which returns its sole argument when invoked.
* @param type the type of the sole parameter and return value of the desired method handle
* @return a unary method handle which accepts and returns the given type
* @throws NullPointerException if the argument is null
* @throws IllegalArgumentException if the given type is {@code void.class}
*/
public static
MethodHandle identity(Class type) {
// Android-added: explicit non-null check.
Objects.requireNonNull(type);
Wrapper btw = (type.isPrimitive() ? Wrapper.forPrimitiveType(type) : Wrapper.OBJECT);
int pos = btw.ordinal();
MethodHandle ident = IDENTITY_MHS[pos];
if (ident == null) {
ident = setCachedMethodHandle(IDENTITY_MHS, pos, makeIdentity(btw.primitiveType()));
}
if (ident.type().returnType() == type)
return ident;
// something like identity(Foo.class); do not bother to intern these
assert (btw == Wrapper.OBJECT);
return makeIdentity(type);
}
/**
* Produces a constant method handle of the requested return type which
* returns the default value for that type every time it is invoked.
* The resulting constant method handle will have no side effects.
* The returned method handle is equivalent to {@code empty(methodType(type))}.
* It is also equivalent to {@code explicitCastArguments(constant(Object.class, null), methodType(type))},
* since {@code explicitCastArguments} converts {@code null} to default values.
* @param type the expected return type of the desired method handle
* @return a constant method handle that takes no arguments
* and returns the default value of the given type (or void, if the type is void)
* @throws NullPointerException if the argument is null
* @see MethodHandles#constant
* @see MethodHandles#empty
* @see MethodHandles#explicitCastArguments
* @since 9
*/
public static MethodHandle zero(Class type) {
Objects.requireNonNull(type);
return type.isPrimitive() ? zero(Wrapper.forPrimitiveType(type), type) : zero(Wrapper.OBJECT, type);
}
private static MethodHandle identityOrVoid(Class type) {
return type == void.class ? zero(type) : identity(type);
}
/**
* Produces a method handle of the requested type which ignores any arguments, does nothing,
* and returns a suitable default depending on the return type.
* That is, it returns a zero primitive value, a {@code null}, or {@code void}.
* The returned method handle is equivalent to
* {@code dropArguments(zero(type.returnType()), 0, type.parameterList())}.
*
* @apiNote Given a predicate and target, a useful "if-then" construct can be produced as
* {@code guardWithTest(pred, target, empty(target.type())}.
* @param type the type of the desired method handle
* @return a constant method handle of the given type, which returns a default value of the given return type
* @throws NullPointerException if the argument is null
* @see MethodHandles#zero
* @see MethodHandles#constant
* @since 9
*/
public static MethodHandle empty(MethodType type) {
Objects.requireNonNull(type);
return dropArguments(zero(type.returnType()), 0, type.parameterList());
}
private static final MethodHandle[] IDENTITY_MHS = new MethodHandle[Wrapper.COUNT];
private static MethodHandle makeIdentity(Class ptype) {
// Android-changed: Android implementation using identity() functions and transformers.
// MethodType mtype = methodType(ptype, ptype);
// LambdaForm lform = LambdaForm.identityForm(BasicType.basicType(ptype));
// return MethodHandleImpl.makeIntrinsic(mtype, lform, Intrinsic.IDENTITY);
if (ptype.isPrimitive()) {
try {
final MethodType mt = methodType(ptype, ptype);
return Lookup.PUBLIC_LOOKUP.findStatic(MethodHandles.class, "identity", mt);
} catch (NoSuchMethodException | IllegalAccessException e) {
throw new AssertionError(e);
}
} else {
return new Transformers.ReferenceIdentity(ptype);
}
}
// Android-added: helper methods for identity().
/** @hide */ public static byte identity(byte val) { return val; }
/** @hide */ public static boolean identity(boolean val) { return val; }
/** @hide */ public static char identity(char val) { return val; }
/** @hide */ public static short identity(short val) { return val; }
/** @hide */ public static int identity(int val) { return val; }
/** @hide */ public static long identity(long val) { return val; }
/** @hide */ public static float identity(float val) { return val; }
/** @hide */ public static double identity(double val) { return val; }
private static MethodHandle zero(Wrapper btw, Class rtype) {
int pos = btw.ordinal();
MethodHandle zero = ZERO_MHS[pos];
if (zero == null) {
zero = setCachedMethodHandle(ZERO_MHS, pos, makeZero(btw.primitiveType()));
}
if (zero.type().returnType() == rtype)
return zero;
assert(btw == Wrapper.OBJECT);
return makeZero(rtype);
}
private static final MethodHandle[] ZERO_MHS = new MethodHandle[Wrapper.COUNT];
private static MethodHandle makeZero(Class rtype) {
// Android-changed: use Android specific implementation.
// MethodType mtype = methodType(rtype);
// LambdaForm lform = LambdaForm.zeroForm(BasicType.basicType(rtype));
// return MethodHandleImpl.makeIntrinsic(mtype, lform, Intrinsic.ZERO);
return new Transformers.ZeroValue(rtype);
}
private static synchronized MethodHandle setCachedMethodHandle(MethodHandle[] cache, int pos, MethodHandle value) {
// Simulate a CAS, to avoid racy duplication of results.
MethodHandle prev = cache[pos];
if (prev != null) return prev;
return cache[pos] = value;
}
/**
* Provides a target method handle with one or more bound arguments
* in advance of the method handle's invocation.
* The formal parameters to the target corresponding to the bound
* arguments are called bound parameters.
* Returns a new method handle which saves away the bound arguments.
* When it is invoked, it receives arguments for any non-bound parameters,
* binds the saved arguments to their corresponding parameters,
* and calls the original target.
*
* The type of the new method handle will drop the types for the bound
* parameters from the original target type, since the new method handle
* will no longer require those arguments to be supplied by its callers.
*
* Each given argument object must match the corresponding bound parameter type.
* If a bound parameter type is a primitive, the argument object
* must be a wrapper, and will be unboxed to produce the primitive value.
*
* The {@code pos} argument selects which parameters are to be bound.
* It may range between zero and N-L (inclusively),
* where N is the arity of the target method handle
* and L is the length of the values array.
* @param target the method handle to invoke after the argument is inserted
* @param pos where to insert the argument (zero for the first)
* @param values the series of arguments to insert
* @return a method handle which inserts an additional argument,
* before calling the original method handle
* @throws NullPointerException if the target or the {@code values} array is null
* @see MethodHandle#bindTo
*/
public static
MethodHandle insertArguments(MethodHandle target, int pos, Object... values) {
int insCount = values.length;
Class[] ptypes = insertArgumentsChecks(target, insCount, pos);
if (insCount == 0) {
return target;
}
// Throw ClassCastExceptions early if we can't cast any of the provided values
// to the required type.
for (int i = 0; i < insCount; i++) {
final Class ptype = ptypes[pos + i];
if (!ptype.isPrimitive()) {
ptypes[pos + i].cast(values[i]);
} else {
// Will throw a ClassCastException if something terrible happens.
values[i] = Wrapper.forPrimitiveType(ptype).convert(values[i], ptype);
}
}
return new Transformers.InsertArguments(target, pos, values);
}
// Android-changed: insertArgumentPrimitive is unused.
//
// private static BoundMethodHandle insertArgumentPrimitive(BoundMethodHandle result, int pos,
// Class ptype, Object value) {
// Wrapper w = Wrapper.forPrimitiveType(ptype);
// // perform unboxing and/or primitive conversion
// value = w.convert(value, ptype);
// switch (w) {
// case INT: return result.bindArgumentI(pos, (int)value);
// case LONG: return result.bindArgumentJ(pos, (long)value);
// case FLOAT: return result.bindArgumentF(pos, (float)value);
// case DOUBLE: return result.bindArgumentD(pos, (double)value);
// default: return result.bindArgumentI(pos, ValueConversions.widenSubword(value));
// }
// }
private static Class[] insertArgumentsChecks(MethodHandle target, int insCount, int pos) throws RuntimeException {
MethodType oldType = target.type();
int outargs = oldType.parameterCount();
int inargs = outargs - insCount;
if (inargs < 0)
throw newIllegalArgumentException("too many values to insert");
if (pos < 0 || pos > inargs)
throw newIllegalArgumentException("no argument type to append");
return oldType.ptypes();
}
// Android-changed: inclusive language preference for 'placeholder'.
/**
* Produces a method handle which will discard some placeholder arguments
* before calling some other specified target method handle.
* The type of the new method handle will be the same as the target's type,
* except it will also include the placeholder argument types,
* at some given position.
*
* The {@code pos} argument may range between zero and N,
* where N is the arity of the target.
* If {@code pos} is zero, the placeholder arguments will precede
* the target's real arguments; if {@code pos} is N
* they will come after.
*
* Example:
*
* This method is also equivalent to the following code:
*
* The {@code pos} argument may range between zero and N,
* where N is the arity of the target.
* If {@code pos} is zero, the placeholder arguments will precede
* the target's real arguments; if {@code pos} is N
* they will come after.
* @apiNote
*
* This method is also equivalent to the following code:
*
* The resulting handle will have the same return type as the target handle.
*
* In more formal terms, assume these two type lists:
* The pre-processing is performed by one or more method handles,
* specified in the elements of the {@code filters} array.
* The first element of the filter array corresponds to the {@code pos}
* argument of the target, and so on in sequence.
* The filter functions are invoked in left to right order.
*
* Null arguments in the array are treated as identity functions,
* and the corresponding arguments left unchanged.
* (If there are no non-null elements in the array, the original target is returned.)
* Each filter is applied to the corresponding argument of the adapter.
*
* If a filter {@code F} applies to the {@code N}th argument of
* the target, then {@code F} must be a method handle which
* takes exactly one argument. The type of {@code F}'s sole argument
* replaces the corresponding argument type of the target
* in the resulting adapted method handle.
* The return type of {@code F} must be identical to the corresponding
* parameter type of the target.
*
* It is an error if there are elements of {@code filters}
* (null or not)
* which do not correspond to argument positions in the target.
* Example:
* Here is pseudocode for the resulting adapter. In the code, {@code T}
* denotes the return type of both the {@code target} and resulting adapter.
* {@code P}/{@code p} and {@code B}/{@code b} represent the types and values
* of the parameters and arguments that precede and follow the filter position
* {@code pos}, respectively. {@code A[i]}/{@code a[i]} stand for the types and
* values of the filtered parameters and arguments; they also represent the
* return types of the {@code filter[i]} handles. The latter accept arguments
* {@code v[i]} of type {@code V[i]}, which also appear in the signature of
* the resulting adapter.
*
* Note: The resulting adapter is never a {@linkplain MethodHandle#asVarargsCollector
* variable-arity method handle}, even if the original target method handle was.
*
* @param target the method handle to invoke after arguments are filtered
* @param pos the position of the first argument to filter
* @param filters method handles to call initially on filtered arguments
* @return method handle which incorporates the specified argument filtering logic
* @throws NullPointerException if the target is null
* or if the {@code filters} array is null
* @throws IllegalArgumentException if a non-null element of {@code filters}
* does not match a corresponding argument type of target as described above,
* or if the {@code pos+filters.length} is greater than {@code target.type().parameterCount()},
* or if the resulting method handle's type would have
* too many parameters
*/
public static
MethodHandle filterArguments(MethodHandle target, int pos, MethodHandle... filters) {
filterArgumentsCheckArity(target, pos, filters);
MethodHandle adapter = target;
// Android-changed: transformer implementation.
// process filters in reverse order so that the invocation of
// the resulting adapter will invoke the filters in left-to-right order
// for (int i = filters.length - 1; i >= 0; --i) {
// MethodHandle filter = filters[i];
// if (filter == null) continue; // ignore null elements of filters
// adapter = filterArgument(adapter, pos + i, filter);
// }
// return adapter;
boolean hasNonNullFilter = false;
for (int i = 0; i < filters.length; ++i) {
MethodHandle filter = filters[i];
if (filter != null) {
hasNonNullFilter = true;
filterArgumentChecks(target, i + pos, filter);
}
}
if (!hasNonNullFilter) {
return target;
}
return new Transformers.FilterArguments(target, pos, filters);
}
/*non-public*/ static
MethodHandle filterArgument(MethodHandle target, int pos, MethodHandle filter) {
filterArgumentChecks(target, pos, filter);
// Android-changed: use Transformer implementation.
// MethodType targetType = target.type();
// MethodType filterType = filter.type();
// BoundMethodHandle result = target.rebind();
// Class newParamType = filterType.parameterType(0);
// LambdaForm lform = result.editor().filterArgumentForm(1 + pos, BasicType.basicType(newParamType));
// MethodType newType = targetType.changeParameterType(pos, newParamType);
// result = result.copyWithExtendL(newType, lform, filter);
// return result;
return new Transformers.FilterArguments(target, pos, filter);
}
private static void filterArgumentsCheckArity(MethodHandle target, int pos, MethodHandle[] filters) {
MethodType targetType = target.type();
int maxPos = targetType.parameterCount();
if (pos + filters.length > maxPos)
throw newIllegalArgumentException("too many filters");
}
private static void filterArgumentChecks(MethodHandle target, int pos, MethodHandle filter) throws RuntimeException {
MethodType targetType = target.type();
MethodType filterType = filter.type();
if (filterType.parameterCount() != 1
|| filterType.returnType() != targetType.parameterType(pos))
throw newIllegalArgumentException("target and filter types do not match", targetType, filterType);
}
/**
* Adapts a target method handle by pre-processing
* a sub-sequence of its arguments with a filter (another method handle).
* The pre-processed arguments are replaced by the result (if any) of the
* filter function.
* The target is then called on the modified (usually shortened) argument list.
*
* If the filter returns a value, the target must accept that value as
* its argument in position {@code pos}, preceded and/or followed by
* any arguments not passed to the filter.
* If the filter returns void, the target must accept all arguments
* not passed to the filter.
* No arguments are reordered, and a result returned from the filter
* replaces (in order) the whole subsequence of arguments originally
* passed to the adapter.
*
* The argument types (if any) of the filter
* replace zero or one argument types of the target, at position {@code pos},
* in the resulting adapted method handle.
* The return type of the filter (if any) must be identical to the
* argument type of the target at position {@code pos}, and that target argument
* is supplied by the return value of the filter.
*
* In all cases, {@code pos} must be greater than or equal to zero, and
* {@code pos} must also be less than or equal to the target's arity.
* Example:
* Here is pseudocode for the resulting adapter:
*
* A collection adapter {@code collectArguments(mh, 0, coll)} is equivalent to
* one which first "folds" the affected arguments, and then drops them, in separate
* steps as follows:
*
* If the target returns a value, the filter must accept that value as
* its only argument.
* If the target returns void, the filter must accept no arguments.
*
* The return type of the filter
* replaces the return type of the target
* in the resulting adapted method handle.
* The argument type of the filter (if any) must be identical to the
* return type of the target.
* Example:
* Here is pseudocode for the resulting adapter. In the code,
* {@code T}/{@code t} represent the result type and value of the
* {@code target}; {@code V}, the result type of the {@code filter}; and
* {@code A}/{@code a}, the types and values of the parameters and arguments
* of the {@code target} as well as the resulting adapter.
*
* Note: The resulting adapter is never a {@linkplain MethodHandle#asVarargsCollector
* variable-arity method handle}, even if the original target method handle was.
* @param target the method handle to invoke before filtering the return value
* @param filter method handle to call on the return value
* @return method handle which incorporates the specified return value filtering logic
* @throws NullPointerException if either argument is null
* @throws IllegalArgumentException if the argument list of {@code filter}
* does not match the return type of target as described above
*/
public static
MethodHandle filterReturnValue(MethodHandle target, MethodHandle filter) {
MethodType targetType = target.type();
MethodType filterType = filter.type();
filterReturnValueChecks(targetType, filterType);
// Android-changed: use a transformer.
// BoundMethodHandle result = target.rebind();
// BasicType rtype = BasicType.basicType(filterType.returnType());
// LambdaForm lform = result.editor().filterReturnForm(rtype, false);
// MethodType newType = targetType.changeReturnType(filterType.returnType());
// result = result.copyWithExtendL(newType, lform, filter);
// return result;
return new Transformers.FilterReturnValue(target, filter);
}
private static void filterReturnValueChecks(MethodType targetType, MethodType filterType) throws RuntimeException {
Class rtype = targetType.returnType();
int filterValues = filterType.parameterCount();
if (filterValues == 0
? (rtype != void.class)
: (rtype != filterType.parameterType(0) || filterValues != 1))
throw newIllegalArgumentException("target and filter types do not match", targetType, filterType);
}
/**
* Adapts a target method handle by pre-processing
* some of its arguments, and then calling the target with
* the result of the pre-processing, inserted into the original
* sequence of arguments.
*
* The pre-processing is performed by {@code combiner}, a second method handle.
* Of the arguments passed to the adapter, the first {@code N} arguments
* are copied to the combiner, which is then called.
* (Here, {@code N} is defined as the parameter count of the combiner.)
* After this, control passes to the target, with any result
* from the combiner inserted before the original {@code N} incoming
* arguments.
*
* If the combiner returns a value, the first parameter type of the target
* must be identical with the return type of the combiner, and the next
* {@code N} parameter types of the target must exactly match the parameters
* of the combiner.
*
* If the combiner has a void return, no result will be inserted,
* and the first {@code N} parameter types of the target
* must exactly match the parameters of the combiner.
*
* The resulting adapter is the same type as the target, except that the
* first parameter type is dropped,
* if it corresponds to the result of the combiner.
*
* (Note that {@link #dropArguments(MethodHandle,int,List) dropArguments} can be used to remove any arguments
* that either the combiner or the target does not wish to receive.
* If some of the incoming arguments are destined only for the combiner,
* consider using {@link MethodHandle#asCollector asCollector} instead, since those
* arguments will not need to be live on the stack on entry to the
* target.)
* Example:
* Here is pseudocode for the resulting adapter. In the code, {@code T}
* represents the result type of the {@code target} and resulting adapter.
* {@code V}/{@code v} represent the type and value of the parameter and argument
* of {@code target} that precedes the folding position; {@code V} also is
* the result type of the {@code combiner}. {@code A}/{@code a} denote the
* types and values of the {@code N} parameters and arguments at the folding
* position. {@code B}/{@code b} represent the types and values of the
* {@code target} parameters and arguments that follow the folded parameters
* and arguments.
*
* Note: The resulting adapter is never a {@linkplain MethodHandle#asVarargsCollector
* variable-arity method handle}, even if the original target method handle was.
* @param target the method handle to invoke after arguments are combined
* @param combiner method handle to call initially on the incoming arguments
* @return method handle which incorporates the specified argument folding logic
* @throws NullPointerException if either argument is null
* @throws IllegalArgumentException if {@code combiner}'s return type
* is non-void and not the same as the first argument type of
* the target, or if the initial {@code N} argument types
* of the target
* (skipping one matching the {@code combiner}'s return type)
* are not identical with the argument types of {@code combiner}
*/
public static
MethodHandle foldArguments(MethodHandle target, MethodHandle combiner) {
return foldArguments(target, 0, combiner);
}
/**
* Adapts a target method handle by pre-processing some of its arguments, starting at a given position, and then
* calling the target with the result of the pre-processing, inserted into the original sequence of arguments just
* before the folded arguments.
*
* This method is closely related to {@link #foldArguments(MethodHandle, MethodHandle)}, but allows to control the
* position in the parameter list at which folding takes place. The argument controlling this, {@code pos}, is a
* zero-based index. The aforementioned method {@link #foldArguments(MethodHandle, MethodHandle)} assumes position
* 0.
*
* @apiNote Example:
* Here is pseudocode for the resulting adapter. In the code, {@code T}
* represents the result type of the {@code target} and resulting adapter.
* {@code V}/{@code v} represent the type and value of the parameter and argument
* of {@code target} that precedes the folding position; {@code V} also is
* the result type of the {@code combiner}. {@code A}/{@code a} denote the
* types and values of the {@code N} parameters and arguments at the folding
* position. {@code Z}/{@code z} and {@code B}/{@code b} represent the types
* and values of the {@code target} parameters and arguments that precede and
* follow the folded parameters and arguments starting at {@code pos},
* respectively.
*
* Note: The resulting adapter is never a {@linkplain MethodHandle#asVarargsCollector
* variable-arity method handle}, even if the original target method handle was.
*
* @param target the method handle to invoke after arguments are combined
* @param pos the position at which to start folding and at which to insert the folding result; if this is {@code
* 0}, the effect is the same as for {@link #foldArguments(MethodHandle, MethodHandle)}.
* @param combiner method handle to call initially on the incoming arguments
* @return method handle which incorporates the specified argument folding logic
* @throws NullPointerException if either argument is null
* @throws IllegalArgumentException if either of the following two conditions holds:
* (1) {@code combiner}'s return type is non-{@code void} and not the same as the argument type at position
* {@code pos} of the target signature;
* (2) the {@code N} argument types at position {@code pos} of the target signature (skipping one matching
* the {@code combiner}'s return type) are not identical with the argument types of {@code combiner}.
*
* @see #foldArguments(MethodHandle, MethodHandle)
* @since 9
*/
public static
MethodHandle foldArguments(MethodHandle target, int pos, MethodHandle combiner) {
MethodType targetType = target.type();
MethodType combinerType = combiner.type();
Class rtype = foldArgumentChecks(pos, targetType, combinerType);
// Android-changed: // Android-changed: transformer implementation.
// BoundMethodHandle result = target.rebind();
// boolean dropResult = rtype == void.class;
// LambdaForm lform = result.editor().foldArgumentsForm(1 + pos, dropResult, combinerType.basicType());
// MethodType newType = targetType;
// if (!dropResult) {
// newType = newType.dropParameterTypes(pos, pos + 1);
// }
// result = result.copyWithExtendL(newType, lform, combiner);
// return result;
return new Transformers.FoldArguments(target, pos, combiner);
}
private static Class foldArgumentChecks(int foldPos, MethodType targetType, MethodType combinerType) {
int foldArgs = combinerType.parameterCount();
Class rtype = combinerType.returnType();
int foldVals = rtype == void.class ? 0 : 1;
int afterInsertPos = foldPos + foldVals;
boolean ok = (targetType.parameterCount() >= afterInsertPos + foldArgs);
if (ok) {
for (int i = 0; i < foldArgs; i++) {
if (combinerType.parameterType(i) != targetType.parameterType(i + afterInsertPos)) {
ok = false;
break;
}
}
}
if (ok && foldVals != 0 && combinerType.returnType() != targetType.parameterType(foldPos))
ok = false;
if (!ok)
throw misMatchedTypes("target and combiner types", targetType, combinerType);
return rtype;
}
/**
* Makes a method handle which adapts a target method handle,
* by guarding it with a test, a boolean-valued method handle.
* If the guard fails, a fallback handle is called instead.
* All three method handles must have the same corresponding
* argument and return types, except that the return type
* of the test must be boolean, and the test is allowed
* to have fewer arguments than the other two method handles.
* Here is pseudocode for the resulting adapter:
*
* The target and handler must have the same corresponding
* argument and return types, except that handler may omit trailing arguments
* (similarly to the predicate in {@link #guardWithTest guardWithTest}).
* Also, the handler must have an extra leading parameter of {@code exType} or a supertype.
*
* Here is pseudocode for the resulting adapter. In the code, {@code T}
* represents the return type of the {@code target} and {@code handler},
* and correspondingly that of the resulting adapter; {@code A}/{@code a},
* the types and values of arguments to the resulting handle consumed by
* {@code handler}; and {@code B}/{@code b}, those of arguments to the
* resulting handle discarded by {@code handler}.
*
* The target and handler must return the same type, even if the handler
* always throws. (This might happen, for instance, because the handler
* is simulating a {@code finally} clause).
* To create such a throwing handler, compose the handler creation logic
* with {@link #throwException throwException},
* in order to create a method handle of the correct return type.
* @param target method handle to call
* @param exType the type of exception which the handler will catch
* @param handler method handle to call if a matching exception is thrown
* @return method handle which incorporates the specified try/catch logic
* @throws NullPointerException if any argument is null
* @throws IllegalArgumentException if {@code handler} does not accept
* the given exception type, or if the method handle types do
* not match in their return types and their
* corresponding parameters
* @see MethodHandles#tryFinally(MethodHandle, MethodHandle)
*/
public static
MethodHandle catchException(MethodHandle target,
Class exType,
MethodHandle handler) {
MethodType ttype = target.type();
MethodType htype = handler.type();
if (!Throwable.class.isAssignableFrom(exType))
throw new ClassCastException(exType.getName());
if (htype.parameterCount() < 1 ||
!htype.parameterType(0).isAssignableFrom(exType))
throw newIllegalArgumentException("handler does not accept exception type "+exType);
if (htype.returnType() != ttype.returnType())
throw misMatchedTypes("target and handler return types", ttype, htype);
handler = dropArgumentsToMatch(handler, 1, ttype.parameterList(), 0, true);
if (handler == null) {
throw misMatchedTypes("target and handler types", ttype, htype);
}
// Android-changed: use Transformer implementation.
// return MethodHandleImpl.makeGuardWithCatch(target, exType, handler);
return new Transformers.CatchException(target, handler, exType);
}
/**
* Produces a method handle which will throw exceptions of the given {@code exType}.
* The method handle will accept a single argument of {@code exType},
* and immediately throw it as an exception.
* The method type will nominally specify a return of {@code returnType}.
* The return type may be anything convenient: It doesn't matter to the
* method handle's behavior, since it will never return normally.
* @param returnType the return type of the desired method handle
* @param exType the parameter type of the desired method handle
* @return method handle which can throw the given exceptions
* @throws NullPointerException if either argument is null
*/
public static
MethodHandle throwException(Class returnType, Class exType) {
if (!Throwable.class.isAssignableFrom(exType))
throw new ClassCastException(exType.getName());
// Android-changed: use Transformer implementation.
// return MethodHandleImpl.throwException(methodType(returnType, exType));
return new Transformers.AlwaysThrow(returnType, exType);
}
/**
* Constructs a method handle representing a loop with several loop variables that are updated and checked upon each
* iteration. Upon termination of the loop due to one of the predicates, a corresponding finalizer is run and
* delivers the loop's result, which is the return value of the resulting handle.
*
* Intuitively, every loop is formed by one or more "clauses", each specifying a local iteration variable and/or a loop
* exit. Each iteration of the loop executes each clause in order. A clause can optionally update its iteration
* variable; it can also optionally perform a test and conditional loop exit. In order to express this logic in
* terms of method handles, each clause will specify up to four independent actions:
* Some of these clause parts may be omitted according to certain rules, and useful default behavior is provided in
* this case. See below for a detailed description.
*
* Parameters optional everywhere:
* Each clause function is allowed but not required to accept a parameter for each iteration variable {@code v}.
* As an exception, the init functions cannot take any {@code v} parameters,
* because those values are not yet computed when the init functions are executed.
* Any clause function may neglect to take any trailing subsequence of parameters it is entitled to take.
* In fact, any clause function may take no arguments at all.
*
* Loop parameters:
* A clause function may take all the iteration variable values it is entitled to, in which case
* it may also take more trailing parameters. Such extra values are called loop parameters,
* with their types and values notated as {@code (A...)} and {@code (a...)}.
* These become the parameters of the resulting loop handle, to be supplied whenever the loop is executed.
* (Since init functions do not accept iteration variables {@code v}, any parameter to an
* init function is automatically a loop parameter {@code a}.)
* As with iteration variables, clause functions are allowed but not required to accept loop parameters.
* These loop parameters act as loop-invariant values visible across the whole loop.
*
* Parameters visible everywhere:
* Each non-init clause function is permitted to observe the entire loop state, because it can be passed the full
* list {@code (v... a...)} of current iteration variable values and incoming loop parameters.
* The init functions can observe initial pre-loop state, in the form {@code (a...)}.
* Most clause functions will not need all of this information, but they will be formally connected to it
* as if by {@link #dropArguments}.
*
* More specifically, we shall use the notation {@code (V*)} to express an arbitrary prefix of a full
* sequence {@code (V...)} (and likewise for {@code (v*)}, {@code (A*)}, {@code (a*)}).
* In that notation, the general form of an init function parameter list
* is {@code (A*)}, and the general form of a non-init function parameter list is {@code (V*)} or {@code (V... A*)}.
*
* Checking clause structure:
* Given a set of clauses, there is a number of checks and adjustments performed to connect all the parts of the
* loop. They are spelled out in detail in the steps below. In these steps, every occurrence of the word "must"
* corresponds to a place where {@link IllegalArgumentException} will be thrown if the required constraint is not
* met by the inputs to the loop combinator.
*
* Effectively identical sequences:
*
* A parameter list {@code A} is defined to be effectively identical to another parameter list {@code B}
* if {@code A} and {@code B} are identical, or if {@code A} is shorter and is identical with a proper prefix of {@code B}.
* When speaking of an unordered set of parameter lists, we say they the set is "effectively identical"
* as a whole if the set contains a longest list, and all members of the set are effectively identical to
* that longest list.
* For example, any set of type sequences of the form {@code (V*)} is effectively identical,
* and the same is true if more sequences of the form {@code (V... A*)} are added.
*
* Step 0: Determine clause structure.
* Step 1A: Determine iteration variable types {@code (V...)}.
* Step 1B: Determine loop parameters {@code (A...)}.
* Step 1C: Determine loop return type.
* Step 1D: Check other types.
* Step 2: Determine parameter lists.
* Step 3: Fill in omitted functions.
* Step 4: Fill in missing parameter types.
* Final observations.
* Example. As a consequence of step 1A above, the {@code loop} combinator has the following property:
*
* Loop execution.
* Usage tips.
*
* Here is pseudocode for the resulting loop handle. As above, {@code V} and {@code v} represent the types
* and values of loop variables; {@code A} and {@code a} represent arguments passed to the whole loop;
* and {@code R} is the common result type of all finalizers as well as of the resulting loop.
*
* The {@code pred} handle describes the loop condition; and {@code body}, its body. The loop resulting from this
* method will, in each iteration, first evaluate the predicate and then execute its body (if the predicate
* evaluates to {@code true}).
* The loop will terminate once the predicate evaluates to {@code false} (the body will not be executed in this case).
*
* The {@code init} handle describes the initial value of an additional optional loop-local variable.
* In each iteration, this loop-local variable, if present, will be passed to the {@code body}
* and updated with the value returned from its invocation. The result of loop execution will be
* the final value of the additional loop-local variable (if present).
*
* The following rules hold for these argument handles:
* The resulting loop handle's result type and parameter signature are determined as follows:
* Here is pseudocode for the resulting loop handle. In the code, {@code V}/{@code v} represent the type / value of
* the sole loop variable as well as the result type of the loop; and {@code A}/{@code a}, that of the argument
* passed to the loop.
*
* The {@code pred} handle describes the loop condition; and {@code body}, its body. The loop resulting from this
* method will, in each iteration, first execute its body and then evaluate the predicate.
* The loop will terminate once the predicate evaluates to {@code false} after an execution of the body.
*
* The {@code init} handle describes the initial value of an additional optional loop-local variable.
* In each iteration, this loop-local variable, if present, will be passed to the {@code body}
* and updated with the value returned from its invocation. The result of loop execution will be
* the final value of the additional loop-local variable (if present).
*
* The following rules hold for these argument handles:
* The resulting loop handle's result type and parameter signature are determined as follows:
* Here is pseudocode for the resulting loop handle. In the code, {@code V}/{@code v} represent the type / value of
* the sole loop variable as well as the result type of the loop; and {@code A}/{@code a}, that of the argument
* passed to the loop.
*
* The number of iterations is determined by the {@code iterations} handle evaluation result.
* The loop counter {@code i} is an extra loop iteration variable of type {@code int}.
* It will be initialized to 0 and incremented by 1 in each iteration.
*
* If the {@code body} handle returns a non-{@code void} type {@code V}, a leading loop iteration variable
* of that type is also present. This variable is initialized using the optional {@code init} handle,
* or to the {@linkplain #empty default value} of type {@code V} if that handle is {@code null}.
*
* In each iteration, the iteration variables are passed to an invocation of the {@code body} handle.
* A non-{@code void} value returned from the body (of type {@code V}) updates the leading
* iteration variable.
* The result of the loop handle execution will be the final {@code V} value of that variable
* (or {@code void} if there is no {@code V} variable).
*
* The following rules hold for the argument handles:
* The resulting loop handle's result type and parameter signature are determined as follows:
* Here is pseudocode for the resulting loop handle. In the code, {@code V}/{@code v} represent the type / value of
* the second loop variable as well as the result type of the loop; and {@code A...}/{@code a...} represent
* arguments passed to the loop.
*
* The loop counter {@code i} is a loop iteration variable of type {@code int}.
* The {@code start} and {@code end} handles determine the start (inclusive) and end (exclusive)
* values of the loop counter.
* The loop counter will be initialized to the {@code int} value returned from the evaluation of the
* {@code start} handle and run to the value returned from {@code end} (exclusively) with a step width of 1.
*
* If the {@code body} handle returns a non-{@code void} type {@code V}, a leading loop iteration variable
* of that type is also present. This variable is initialized using the optional {@code init} handle,
* or to the {@linkplain #empty default value} of type {@code V} if that handle is {@code null}.
*
* In each iteration, the iteration variables are passed to an invocation of the {@code body} handle.
* A non-{@code void} value returned from the body (of type {@code V}) updates the leading
* iteration variable.
* The result of the loop handle execution will be the final {@code V} value of that variable
* (or {@code void} if there is no {@code V} variable).
*
* The following rules hold for the argument handles:
* The resulting loop handle's result type and parameter signature are determined as follows:
* Here is pseudocode for the resulting loop handle. In the code, {@code V}/{@code v} represent the type / value of
* the second loop variable as well as the result type of the loop; and {@code A...}/{@code a...} represent
* arguments passed to the loop.
*
* The iterator itself will be determined by the evaluation of the {@code iterator} handle.
* Each value it produces will be stored in a loop iteration variable of type {@code T}.
*
* If the {@code body} handle returns a non-{@code void} type {@code V}, a leading loop iteration variable
* of that type is also present. This variable is initialized using the optional {@code init} handle,
* or to the {@linkplain #empty default value} of type {@code V} if that handle is {@code null}.
*
* In each iteration, the iteration variables are passed to an invocation of the {@code body} handle.
* A non-{@code void} value returned from the body (of type {@code V}) updates the leading
* iteration variable.
* The result of the loop handle execution will be the final {@code V} value of that variable
* (or {@code void} if there is no {@code V} variable).
*
* The following rules hold for the argument handles:
* The type {@code T} may be either a primitive or reference.
* Since type {@code Iterator
* The resulting loop handle's result type and parameter signature are determined as follows:
* Here is pseudocode for the resulting loop handle. In the code, {@code V}/{@code v} represent the type / value of
* the loop variable as well as the result type of the loop; {@code T}/{@code t}, that of the elements of the
* structure the loop iterates over, and {@code A...}/{@code a...} represent arguments passed to the loop.
*
* The {@code cleanup} handle will be passed one or two additional leading arguments.
* The first is the exception thrown during the
* execution of the {@code target} handle, or {@code null} if no exception was thrown.
* The second is the result of the execution of the {@code target} handle, or, if it throws an exception,
* a {@code null}, zero, or {@code false} value of the required type is supplied as a placeholder.
* The second argument is not present if the {@code target} handle has a {@code void} return type.
* (Note that, except for argument type conversions, combinators represent {@code void} values in parameter lists
* by omitting the corresponding paradoxical arguments, not by inserting {@code null} or zero values.)
*
* The {@code target} and {@code cleanup} handles must have the same corresponding argument and return types, except
* that the {@code cleanup} handle may omit trailing arguments. Also, the {@code cleanup} handle must have one or
* two extra leading parameters:
* The pseudocode for the resulting adapter looks as follows. In the code, {@code V} represents the result type of
* the {@code try/finally} construct; {@code A}/{@code a}, the types and values of arguments to the resulting
* handle consumed by the cleanup; and {@code B}/{@code b}, those of arguments to the resulting handle discarded by
* the cleanup.
*
* Note that the saved arguments ({@code a...} in the pseudocode) cannot
* be modified by execution of the target, and so are passed unchanged
* from the caller to the cleanup, if it is invoked.
*
* The target and cleanup must return the same type, even if the cleanup
* always throws.
* To create such a throwing cleanup, compose the cleanup logic
* with {@link #throwException throwException},
* in order to create a method handle of the correct return type.
*
* Note that {@code tryFinally} never converts exceptions into normal returns.
* In rare cases where exceptions must be converted in that way, first wrap
* the target with {@link #catchException(MethodHandle, Class, MethodHandle)}
* to capture an outgoing exception, and then wrap with {@code tryFinally}.
*
* It is recommended that the first parameter type of {@code cleanup} be
* declared {@code Throwable} rather than a narrower subtype. This ensures
* {@code cleanup} will always be invoked with whatever exception that
* {@code target} throws. Declaring a narrower type may result in a
* {@code ClassCastException} being thrown by the {@code try-finally}
* handle if the type of the exception thrown by {@code target} is not
* assignable to the first parameter type of {@code cleanup}. Note that
* various exception types of {@code VirtualMachineError},
* {@code LinkageError}, and {@code RuntimeException} can in principle be
* thrown by almost any kind of Java code, and a finally clause that
* catches (say) only {@code IOException} would mask any of the others
* behind a {@code ClassCastException}.
*
* @param target the handle whose execution is to be wrapped in a {@code try} block.
* @param cleanup the handle that is invoked in the finally block.
*
* @return a method handle embodying the {@code try-finally} block composed of the two arguments.
* @throws NullPointerException if any argument is null
* @throws IllegalArgumentException if {@code cleanup} does not accept
* the required leading arguments, or if the method handle types do
* not match in their return types and their
* corresponding trailing parameters
*
* @see MethodHandles#catchException(MethodHandle, Class, MethodHandle)
* @since 9
*/
public static MethodHandle tryFinally(MethodHandle target, MethodHandle cleanup) {
List
* For a selector value of {@code n}, where {@code n} falls in the range {@code [0, N)},
* and where {@code N} is the number of target method handles, the table switch method
* handle will invoke the n-th target method handle from the list of target method handles.
*
* For a selector value that does not fall in the range {@code [0, N)}, the table switch
* method handle will invoke the given fallback method handle.
*
* All method handles passed to this method must have the same type, with the additional
* requirement that the leading parameter be of type {@code int}. The leading parameter
* represents the selector.
*
* Any trailing parameters present in the type will appear on the returned table switch
* method handle as well. Any arguments assigned to these parameters will be forwarded,
* together with the selector value, to the selected method handle when invoking it.
*
* @apiNote Example:
* The cases each drop the {@code selector} value they are given, and take an additional
* {@code String} argument, which is concatenated (using {@link String#concat(String)})
* to a specific constant label string for each case:
* Lookup Factory Methods
* The factory methods on a {@code Lookup} object correspond to all major
* use cases for methods, constructors, and fields.
* Each method handle created by a factory method is the functional
* equivalent of a particular bytecode behavior.
* (Bytecode behaviors are described in section 5.4.3.5 of the Java Virtual Machine Specification.)
* Here is a summary of the correspondence between these factory methods and
* the behavior the resulting method handles:
*
*
*
* Access checking
* Access checks are applied in the factory methods of {@code Lookup},
* when a method handle is created.
* This is a key difference from the Core Reflection API, since
* {@link java.lang.reflect.Method#invoke java.lang.reflect.Method.invoke}
* performs access checking against every caller, on every call.
*
*
*
*
* Security manager interactions
* Although bytecode instructions can only refer to classes in
* a related class loader, this API can search for methods in any
* class, as long as a reference to its {@code Class} object is
* available. Such cross-loader references are also possible with the
* Core Reflection API, and are impossible to bytecode instructions
* such as {@code invokestatic} or {@code getfield}.
* There is a {@linkplain java.lang.SecurityManager security manager API}
* to allow applications to check such cross-loader references.
* These checks apply to both the {@code MethodHandles.Lookup} API
* and the Core Reflection API
* (as found on {@link java.lang.Class Class}).
*
*
* Security checks are performed after other access checks have passed.
* Therefore, the above rules presuppose a member that is public,
* or else that is being accessed from a lookup class that has
* rights to access the member.
*
* Caller sensitive methods
* A small number of Java methods have a special property called caller sensitivity.
* A caller-sensitive method can behave differently depending on the
* identity of its immediate caller.
*
*
*
* @param requestedLookupClass the desired lookup class for the new lookup object
* @return a lookup object which reports the desired lookup class
* @throws NullPointerException if the argument is null
*/
public Lookup in(Class requestedLookupClass) {
requestedLookupClass.getClass(); // null check
// Android-changed: There's no notion of a trusted lookup.
// if (allowedModes == TRUSTED) // IMPL_LOOKUP can make any lookup at all
// return new Lookup(requestedLookupClass, ALL_MODES);
if (requestedLookupClass == this.lookupClass)
return this; // keep same capabilities
int newModes = (allowedModes & (ALL_MODES & ~PROTECTED));
if ((newModes & PACKAGE) != 0
&& !VerifyAccess.isSamePackage(this.lookupClass, requestedLookupClass)) {
newModes &= ~(PACKAGE|PRIVATE);
}
// Allow nestmate lookups to be created without special privilege:
if ((newModes & PRIVATE) != 0
&& !VerifyAccess.isSamePackageMember(this.lookupClass, requestedLookupClass)) {
newModes &= ~PRIVATE;
}
if ((newModes & PUBLIC) != 0
&& !VerifyAccess.isClassAccessible(requestedLookupClass, this.lookupClass, allowedModes)) {
// The requested class it not accessible from the lookup class.
// No permissions.
newModes = 0;
}
checkUnprivilegedlookupClass(requestedLookupClass, newModes);
return new Lookup(requestedLookupClass, newModes);
}
// Make sure outer class is initialized first.
//
// Android-changed: Removed unnecessary reference to IMPL_NAMES.
// static { IMPL_NAMES.getClass(); }
/** Version of lookup which is trusted minimally.
* It can only be used to create method handles to
* publicly accessible members.
*/
static final Lookup PUBLIC_LOOKUP = new Lookup(Object.class, PUBLIC);
/** Package-private version of lookup which is trusted. */
static final Lookup IMPL_LOOKUP = new Lookup(Object.class, ALL_MODES);
private static void checkUnprivilegedlookupClass(Class lookupClass, int allowedModes) {
String name = lookupClass.getName();
if (name.startsWith("java.lang.invoke."))
throw newIllegalArgumentException("illegal lookupClass: "+lookupClass);
// For caller-sensitive MethodHandles.lookup()
// disallow lookup more restricted packages
//
// Android-changed: The bootstrap classloader isn't null.
if (allowedModes == ALL_MODES &&
lookupClass.getClassLoader() == Object.class.getClassLoader()) {
if ((name.startsWith("java.")
&& !name.startsWith("java.io.ObjectStreamClass")
&& !name.startsWith("java.util.concurrent.")
&& !name.equals("java.lang.Daemons$FinalizerWatchdogDaemon")
&& !name.equals("java.lang.runtime.ObjectMethods")
&& !name.equals("java.lang.Thread")
&& !name.equals("java.util.HashMap")) ||
(name.startsWith("sun.")
&& !name.startsWith("sun.invoke.")
&& !name.equals("sun.reflect.ReflectionFactory"))) {
throw newIllegalArgumentException("illegal lookupClass: " + lookupClass);
}
}
}
/**
* Displays the name of the class from which lookups are to be made.
* (The name is the one reported by {@link java.lang.Class#getName() Class.getName}.)
* If there are restrictions on the access permitted to this lookup,
* this is indicated by adding a suffix to the class name, consisting
* of a slash and a keyword. The keyword represents the strongest
* allowed access, and is chosen as follows:
*
*
* If none of the above cases apply, it is the case that full
* access (public, package, private, and protected) is allowed.
* In this case, no suffix is added.
* This is true only of an object obtained originally from
* {@link java.lang.invoke.MethodHandles#lookup MethodHandles.lookup}.
* Objects created by {@link java.lang.invoke.MethodHandles.Lookup#in Lookup.in}
* always have restricted access, and will display a suffix.
*
* @param refc the class from which the method is accessed
* @param name the name of the method
* @param type the type of the method
* @return the desired method handle
* @throws NoSuchMethodException if the method does not exist
* @throws IllegalAccessException if access checking fails,
* or if the method is not {@code static},
* or if the method's variable arity modifier bit
* is set and {@code asVarargsCollector} fails
* @exception SecurityException if a security manager is present and it
* refuses access
* @throws NullPointerException if any argument is null
*/
public
MethodHandle findStatic(Class refc, String name, MethodType type) throws NoSuchMethodException, IllegalAccessException {
Method method = refc.getDeclaredMethod(name, type.ptypes());
final int modifiers = method.getModifiers();
if (!Modifier.isStatic(modifiers)) {
throw new IllegalAccessException("Method" + method + " is not static");
}
checkReturnType(method, type);
checkAccess(refc, method.getDeclaringClass(), modifiers, method.getName());
return createMethodHandle(method, MethodHandle.INVOKE_STATIC, type);
}
private MethodHandle findVirtualForMH(String name, MethodType type) {
// these names require special lookups because of the implicit MethodType argument
if ("invoke".equals(name))
return invoker(type);
if ("invokeExact".equals(name))
return exactInvoker(type);
return null;
}
private MethodHandle findVirtualForVH(String name, MethodType type) {
VarHandle.AccessMode accessMode;
try {
accessMode = VarHandle.AccessMode.valueFromMethodName(name);
} catch (IllegalArgumentException e) {
return null;
}
return varHandleInvoker(accessMode, type);
}
private static MethodHandle createMethodHandle(Method method, int handleKind,
MethodType methodType) {
MethodHandle mh = new MethodHandleImpl(method.getArtMethod(), handleKind, methodType);
if (method.isVarArgs()) {
return new Transformers.VarargsCollector(mh);
} else {
return mh;
}
}
/**
* Produces a method handle for a virtual method.
* The type of the method handle will be that of the method,
* with the receiver type (usually {@code refc}) prepended.
* The method and all its argument types must be accessible to the lookup object.
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
MethodHandle MH_asList = publicLookup().findStatic(Arrays.class,
"asList", methodType(List.class, Object[].class));
assertEquals("[x, y]", MH_asList.invoke("x", "y").toString());
* }
*
* @param refc the class or interface from which the method is accessed
* @param name the name of the method
* @param type the type of the method, with the receiver argument omitted
* @return the desired method handle
* @throws NoSuchMethodException if the method does not exist
* @throws IllegalAccessException if access checking fails,
* or if the method is {@code static}
* or if the method's variable arity modifier bit
* is set and {@code asVarargsCollector} fails
* @exception SecurityException if a security manager is present and it
* refuses access
* @throws NullPointerException if any argument is null
*/
public MethodHandle findVirtual(Class refc, String name, MethodType type) throws NoSuchMethodException, IllegalAccessException {
// Special case : when we're looking up a virtual method on the MethodHandles class
// itself, we can return one of our specialized invokers.
if (refc == MethodHandle.class) {
MethodHandle mh = findVirtualForMH(name, type);
if (mh != null) {
return mh;
}
} else if (refc == VarHandle.class) {
// Returns an non-exact invoker.
MethodHandle mh = findVirtualForVH(name, type);
if (mh != null) {
return mh;
}
}
Method method = refc.getInstanceMethod(name, type.ptypes());
if (method == null) {
// This is pretty ugly and a consequence of the MethodHandles API. We have to throw
// an IAE and not an NSME if the method exists but is static (even though the RI's
// IAE has a message that says "no such method"). We confine the ugliness and
// slowness to the failure case, and allow getInstanceMethod to remain fairly
// general.
try {
Method m = refc.getDeclaredMethod(name, type.ptypes());
if (Modifier.isStatic(m.getModifiers())) {
throw new IllegalAccessException("Method" + m + " is static");
}
} catch (NoSuchMethodException ignored) {
}
throw new NoSuchMethodException(name + " " + Arrays.toString(type.ptypes()));
}
checkReturnType(method, type);
// We have a valid method, perform access checks.
checkAccess(refc, method.getDeclaringClass(), method.getModifiers(), method.getName());
// Insert the leading reference parameter.
MethodType handleType = type.insertParameterTypes(0, refc);
return createMethodHandle(method, MethodHandle.INVOKE_VIRTUAL, handleType);
}
/**
* Produces a method handle which creates an object and initializes it, using
* the constructor of the specified type.
* The parameter types of the method handle will be those of the constructor,
* while the return type will be a reference to the constructor's class.
* The constructor and all its argument types must be accessible to the lookup object.
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
MethodHandle MH_concat = publicLookup().findVirtual(String.class,
"concat", methodType(String.class, String.class));
MethodHandle MH_hashCode = publicLookup().findVirtual(Object.class,
"hashCode", methodType(int.class));
MethodHandle MH_hashCode_String = publicLookup().findVirtual(String.class,
"hashCode", methodType(int.class));
assertEquals("xy", (String) MH_concat.invokeExact("x", "y"));
assertEquals("xy".hashCode(), (int) MH_hashCode.invokeExact((Object)"xy"));
assertEquals("xy".hashCode(), (int) MH_hashCode_String.invokeExact("xy"));
// interface method:
MethodHandle MH_subSequence = publicLookup().findVirtual(CharSequence.class,
"subSequence", methodType(CharSequence.class, int.class, int.class));
assertEquals("def", MH_subSequence.invoke("abcdefghi", 3, 6).toString());
// constructor "internal method" must be accessed differently:
MethodType MT_newString = methodType(void.class); //()V for new String()
try { assertEquals("impossible", lookup()
.findVirtual(String.class, "
* @param refc the class or interface from which the method is accessed
* @param type the type of the method, with the receiver argument omitted, and a void return type
* @return the desired method handle
* @throws NoSuchMethodException if the constructor does not exist
* @throws IllegalAccessException if access checking fails
* or if the method's variable arity modifier bit
* is set and {@code asVarargsCollector} fails
* @exception SecurityException if a security manager is present and it
* refuses access
* @throws NullPointerException if any argument is null
*/
public MethodHandle findConstructor(Class refc, MethodType type) throws NoSuchMethodException, IllegalAccessException {
if (refc.isArray()) {
throw new NoSuchMethodException("no constructor for array class: " + refc.getName());
}
// The queried |type| is (PT1,PT2,..)V
Constructor constructor = refc.getDeclaredConstructor(type.ptypes());
if (constructor == null) {
throw new NoSuchMethodException(
"No constructor for " + constructor.getDeclaringClass() + " matching " + type);
}
checkAccess(refc, constructor.getDeclaringClass(), constructor.getModifiers(),
constructor.getName());
return createMethodHandleForConstructor(constructor);
}
// BEGIN Android-added: Add findClass(String) from OpenJDK 17. http://b/270028670
// TODO: Unhide this method.
/**
* Looks up a class by name from the lookup context defined by this {@code Lookup} object,
* as if resolved by an {@code ldc} instruction.
* Such a resolution, as specified in JVMS 5.4.3.1 section, attempts to locate and load the class,
* and then determines whether the class is accessible to this lookup object.
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
MethodHandle MH_newArrayList = publicLookup().findConstructor(
ArrayList.class, methodType(void.class, Collection.class));
Collection orig = Arrays.asList("x", "y");
Collection copy = (ArrayList) MH_newArrayList.invokeExact(orig);
assert(orig != copy);
assertEquals(orig, copy);
// a variable-arity constructor:
MethodHandle MH_newProcessBuilder = publicLookup().findConstructor(
ProcessBuilder.class, methodType(void.class, String[].class));
ProcessBuilder pb = (ProcessBuilder)
MH_newProcessBuilder.invoke("x", "y", "z");
assertEquals("[x, y, z]", pb.command().toString());
* }
*
*
*
*
*
*
*
*
* @param refc the class or interface from which the method is accessed
* @param name the name of the method (which must not be "<init>")
* @param type the type of the method, with the receiver argument omitted
* @param specialCaller the proposed calling class to perform the {@code invokespecial}
* @return the desired method handle
* @throws NoSuchMethodException if the method does not exist
* @throws IllegalAccessException if access checking fails
* or if the method's variable arity modifier bit
* is set and {@code asVarargsCollector} fails
* @exception SecurityException if a security manager is present and it
* refuses access
* @throws NullPointerException if any argument is null
*/
public MethodHandle findSpecial(Class refc, String name, MethodType type,
Class specialCaller) throws NoSuchMethodException, IllegalAccessException {
if (specialCaller == null) {
throw new NullPointerException("specialCaller == null");
}
if (type == null) {
throw new NullPointerException("type == null");
}
if (name == null) {
throw new NullPointerException("name == null");
}
if (refc == null) {
throw new NullPointerException("ref == null");
}
// Make sure that the special caller is identical to the lookup class or that we have
// private access.
// Android-changed: Also allow access to any interface methods.
checkSpecialCaller(specialCaller, refc);
// Even though constructors are invoked using a "special" invoke, handles to them can't
// be created using findSpecial. Callers must use findConstructor instead. Similarly,
// there is no path for calling static class initializers.
if (name.startsWith("<")) {
throw new NoSuchMethodException(name + " is not a valid method name.");
}
Method method = refc.getDeclaredMethod(name, type.ptypes());
checkReturnType(method, type);
return findSpecial(method, type, refc, specialCaller);
}
private MethodHandle findSpecial(Method method, MethodType type,
Class refc, Class specialCaller)
throws IllegalAccessException {
if (Modifier.isStatic(method.getModifiers())) {
throw new IllegalAccessException("expected a non-static method:" + method);
}
if (Modifier.isPrivate(method.getModifiers())) {
// Since this is a private method, we'll need to also make sure that the
// lookup class is the same as the refering class. We've already checked that
// the specialCaller is the same as the special lookup class, both of these must
// be the same as the declaring class(*) in order to access the private method.
//
// (*) Well, this isn't true for nested classes but OpenJDK doesn't support those
// either.
if (refc != lookupClass()) {
throw new IllegalAccessException("no private access for invokespecial : "
+ refc + ", from" + this);
}
// This is a private method, so there's nothing special to do.
MethodType handleType = type.insertParameterTypes(0, refc);
return createMethodHandle(method, MethodHandle.INVOKE_DIRECT, handleType);
}
// This is a public, protected or package-private method, which means we're expecting
// invoke-super semantics. We'll have to restrict the receiver type appropriately on the
// handle once we check that there really is a "super" relationship between them.
if (!method.getDeclaringClass().isAssignableFrom(specialCaller)) {
throw new IllegalAccessException(refc + "is not assignable from " + specialCaller);
}
// Note that we restrict the receiver to "specialCaller" instances.
MethodType handleType = type.insertParameterTypes(0, specialCaller);
return createMethodHandle(method, MethodHandle.INVOKE_SUPER, handleType);
}
/**
* Produces a method handle giving read access to a non-static field.
* The type of the method handle will have a return type of the field's
* value type.
* The method handle's single argument will be the instance containing
* the field.
* Access checking is performed immediately on behalf of the lookup class.
* @param refc the class or interface from which the method is accessed
* @param name the field's name
* @param type the field's type
* @return a method handle which can load values from the field
* @throws NoSuchFieldException if the field does not exist
* @throws IllegalAccessException if access checking fails, or if the field is {@code static}
* @exception SecurityException if a security manager is present and it
* refuses access
* @throws NullPointerException if any argument is null
*/
public MethodHandle findGetter(Class refc, String name, Class type) throws NoSuchFieldException, IllegalAccessException {
return findAccessor(refc, name, type, MethodHandle.IGET);
}
private MethodHandle findAccessor(Class refc, String name, Class type, int kind)
throws NoSuchFieldException, IllegalAccessException {
final Field field = findFieldOfType(refc, name, type);
return findAccessor(field, refc, type, kind, true /* performAccessChecks */);
}
private MethodHandle findAccessor(Field field, Class refc, Class type, int kind,
boolean performAccessChecks)
throws IllegalAccessException {
final boolean isSetterKind = kind == MethodHandle.IPUT || kind == MethodHandle.SPUT;
final boolean isStaticKind = kind == MethodHandle.SGET || kind == MethodHandle.SPUT;
commonFieldChecks(field, refc, type, isStaticKind, performAccessChecks);
if (performAccessChecks) {
final int modifiers = field.getModifiers();
if (isSetterKind && Modifier.isFinal(modifiers)) {
throw new IllegalAccessException("Field " + field + " is final");
}
}
final MethodType methodType;
switch (kind) {
case MethodHandle.SGET:
methodType = MethodType.methodType(type);
break;
case MethodHandle.SPUT:
methodType = MethodType.methodType(void.class, type);
break;
case MethodHandle.IGET:
methodType = MethodType.methodType(type, refc);
break;
case MethodHandle.IPUT:
methodType = MethodType.methodType(void.class, refc, type);
break;
default:
throw new IllegalArgumentException("Invalid kind " + kind);
}
return new MethodHandleImpl(field.getArtField(), kind, methodType);
}
/**
* Produces a method handle giving write access to a non-static field.
* The type of the method handle will have a void return type.
* The method handle will take two arguments, the instance containing
* the field, and the value to be stored.
* The second argument will be of the field's value type.
* Access checking is performed immediately on behalf of the lookup class.
* @param refc the class or interface from which the method is accessed
* @param name the field's name
* @param type the field's type
* @return a method handle which can store values into the field
* @throws NoSuchFieldException if the field does not exist
* @throws IllegalAccessException if access checking fails, or if the field is {@code static}
* @exception SecurityException if a security manager is present and it
* refuses access
* @throws NullPointerException if any argument is null
*/
public MethodHandle findSetter(Class refc, String name, Class type) throws NoSuchFieldException, IllegalAccessException {
return findAccessor(refc, name, type, MethodHandle.IPUT);
}
// BEGIN Android-changed: OpenJDK 9+181 VarHandle API factory method.
/**
* Produces a VarHandle giving access to a non-static field {@code name}
* of type {@code type} declared in a class of type {@code recv}.
* The VarHandle's variable type is {@code type} and it has one
* coordinate type, {@code recv}.
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
static class Listie extends ArrayList {
public String toString() { return "[wee Listie]"; }
static Lookup lookup() { return MethodHandles.lookup(); }
}
...
// no access to constructor via invokeSpecial:
MethodHandle MH_newListie = Listie.lookup()
.findConstructor(Listie.class, methodType(void.class));
Listie l = (Listie) MH_newListie.invokeExact();
try { assertEquals("impossible", Listie.lookup().findSpecial(
Listie.class, "
*
*
*
*
* where {@code defc} is either {@code receiver.getClass()} or a super
* type of that class, in which the requested method is accessible
* to the lookup class.
* (Note that {@code bindTo} does not preserve variable arity.)
* @param receiver the object from which the method is accessed
* @param name the name of the method
* @param type the type of the method, with the receiver argument omitted
* @return the desired method handle
* @throws NoSuchMethodException if the method does not exist
* @throws IllegalAccessException if access checking fails
* or if the method's variable arity modifier bit
* is set and {@code asVarargsCollector} fails
* @exception SecurityException if a security manager is present and it
* refuses access
* @throws NullPointerException if any argument is null
* @see MethodHandle#bindTo
* @see #findVirtual
*/
public MethodHandle bind(Object receiver, String name, MethodType type) throws NoSuchMethodException, IllegalAccessException {
MethodHandle handle = findVirtual(receiver.getClass(), name, type);
MethodHandle adapter = handle.bindTo(receiver);
MethodType adapterType = adapter.type();
if (handle.isVarargsCollector()) {
adapter = adapter.asVarargsCollector(
adapterType.parameterType(adapterType.parameterCount() - 1));
}
return adapter;
}
/**
* Makes a direct method handle
* to m, if the lookup class has permission.
* If m is non-static, the receiver argument is treated as an initial argument.
* If m is virtual, overriding is respected on every call.
* Unlike the Core Reflection API, exceptions are not wrapped.
* The type of the method handle will be that of the method,
* with the receiver type prepended (but only if it is non-static).
* If the method's {@code accessible} flag is not set,
* access checking is performed immediately on behalf of the lookup class.
* If m is not public, do not share the resulting handle with untrusted parties.
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
MethodHandle mh0 = lookup().findVirtual(defc, name, type);
MethodHandle mh1 = mh0.bindTo(receiver);
MethodType mt1 = mh1.type();
if (mh0.isVarargsCollector())
mh1 = mh1.asVarargsCollector(mt1.parameterType(mt1.parameterCount()-1));
return mh1;
* }
*
*
*
*
*
* {@code
* int sizeOfT = T_BOX.BYTES; // size in bytes of T
* int misalignedAtZeroIndex = ByteBuffer.wrap(new byte[0]).
* alignmentOffset(0, sizeOfT);
* int misalignedAtIndex = (misalignedAtZeroIndex + index) % sizeOfT;
* boolean isMisaligned = misalignedAtIndex != 0;
* }
*
*
* {@code
* int sizeOfT = T_BOX.BYTES; // size in bytes of T
* ByteBuffer bb = ...
* int misalignedAtIndex = bb.alignmentOffset(index, sizeOfT);
* boolean isMisaligned = misalignedAtIndex != 0;
* }
*
*
*
* This method throws no reflective or security exceptions.
* @param type the desired target type
* @param leadingArgCount number of fixed arguments, to be passed unchanged to the target
* @return a method handle suitable for invoking any method handle of the given type
* @throws NullPointerException if {@code type} is null
* @throws IllegalArgumentException if {@code leadingArgCount} is not in
* the range from 0 to {@code type.parameterCount()} inclusive,
* or if the resulting method handle's type would have
* too many parameters
*/
static public
MethodHandle spreadInvoker(MethodType type, int leadingArgCount) {
if (leadingArgCount < 0 || leadingArgCount > type.parameterCount())
throw newIllegalArgumentException("bad argument count", leadingArgCount);
MethodHandle invoker = MethodHandles.invoker(type);
int spreadArgCount = type.parameterCount() - leadingArgCount;
invoker = invoker.asSpreader(Object[].class, spreadArgCount);
return invoker;
}
/**
* Produces a special invoker method handle which can be used to
* invoke any method handle of the given type, as if by {@link MethodHandle#invokeExact invokeExact}.
* The resulting invoker will have a type which is
* exactly equal to the desired type, except that it will accept
* an additional leading argument of type {@code MethodHandle}.
* {@code
MethodHandle invoker = MethodHandles.invoker(type);
int spreadArgCount = type.parameterCount() - leadingArgCount;
invoker = invoker.asSpreader(Object[].class, spreadArgCount);
return invoker;
* }
*
* @param target the method handle to invoke after arguments are retyped
* @param newType the expected type of the new method handle
* @return a method handle which delegates to the target after performing
* any necessary argument conversions, and arranges for any
* necessary return value conversions
* @throws NullPointerException if either argument is null
* @throws WrongMethodTypeException if the conversion cannot be made
* @see MethodHandle#asType
*/
public static
MethodHandle explicitCastArguments(MethodHandle target, MethodType newType) {
explicitCastArgumentsChecks(target, newType);
// use the asTypeCache when possible:
MethodType oldType = target.type();
if (oldType == newType) return target;
if (oldType.explicitCastEquivalentToAsType(newType)) {
if (Transformers.Transformer.class.isAssignableFrom(target.getClass())) {
// The StackFrameReader and StackFrameWriter used to perform transforms on
// EmulatedStackFrames (in Transformers.java) do not how to perform asType()
// conversions, but we know here that an explicit cast transform is the same as
// having called asType() on the method handle.
return new Transformers.ExplicitCastArguments(target.asFixedArity(), newType);
} else {
// Runtime will perform asType() conversion during invocation.
return target.asFixedArity().asType(newType);
}
}
return new Transformers.ExplicitCastArguments(target, newType);
}
private static void explicitCastArgumentsChecks(MethodHandle target, MethodType newType) {
if (target.type().parameterCount() != newType.parameterCount()) {
throw new WrongMethodTypeException("cannot explicitly cast " + target +
" to " + newType);
}
}
/**
* Produces a method handle which adapts the calling sequence of the
* given method handle to a new type, by reordering the arguments.
* The resulting method handle is guaranteed to report a type
* which is equal to the desired new type.
*
* @param target the method handle to invoke after arguments are reordered
* @param newType the expected type of the new method handle
* @param reorder an index array which controls the reordering
* @return a method handle which delegates to the target after it
* drops unused arguments and moves and/or duplicates the other arguments
* @throws NullPointerException if any argument is null
* @throws IllegalArgumentException if the index array length is not equal to
* the arity of the target, or if any index array element
* not a valid index for a parameter of {@code newType},
* or if two corresponding parameter types in
* {@code target.type()} and {@code newType} are not identical,
*/
public static
MethodHandle permuteArguments(MethodHandle target, MethodType newType, int... reorder) {
reorder = reorder.clone(); // get a private copy
MethodType oldType = target.type();
permuteArgumentChecks(reorder, newType, oldType);
return new Transformers.PermuteArguments(newType, target, reorder);
}
// Android-changed: findFirstDupOrDrop is unused and removed.
// private static int findFirstDupOrDrop(int[] reorder, int newArity);
private static boolean permuteArgumentChecks(int[] reorder, MethodType newType, MethodType oldType) {
if (newType.returnType() != oldType.returnType())
throw newIllegalArgumentException("return types do not match",
oldType, newType);
if (reorder.length == oldType.parameterCount()) {
int limit = newType.parameterCount();
boolean bad = false;
for (int j = 0; j < reorder.length; j++) {
int i = reorder[j];
if (i < 0 || i >= limit) {
bad = true; break;
}
Class src = newType.parameterType(i);
Class dst = oldType.parameterType(j);
if (src != dst)
throw newIllegalArgumentException("parameter types do not match after reorder",
oldType, newType);
}
if (!bad) return true;
}
throw newIllegalArgumentException("bad reorder array: "+Arrays.toString(reorder));
}
/**
* Produces a method handle of the requested return type which returns the given
* constant value every time it is invoked.
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
MethodType intfn1 = methodType(int.class, int.class);
MethodType intfn2 = methodType(int.class, int.class, int.class);
MethodHandle sub = ... (int x, int y) -> (x-y) ...;
assert(sub.type().equals(intfn2));
MethodHandle sub1 = permuteArguments(sub, intfn2, 0, 1);
MethodHandle rsub = permuteArguments(sub, intfn2, 1, 0);
assert((int)rsub.invokeExact(1, 100) == 99);
MethodHandle add = ... (int x, int y) -> (x+y) ...;
assert(add.type().equals(intfn2));
MethodHandle twice = permuteArguments(add, intfn1, 0, 0);
assert(twice.type().equals(intfn1));
assert((int)twice.invokeExact(21) == 42);
* }
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
MethodHandle cat = lookup().findVirtual(String.class,
"concat", methodType(String.class, String.class));
assertEquals("xy", (String) cat.invokeExact("x", "y"));
MethodType bigType = cat.type().insertParameterTypes(0, int.class, String.class);
MethodHandle d0 = dropArguments(cat, 0, bigType.parameterList().subList(0,2));
assertEquals(bigType, d0.type());
assertEquals("yz", (String) d0.invokeExact(123, "x", "y", "z"));
* }
* @param target the method handle to invoke after the arguments are dropped
* @param valueTypes the type(s) of the argument(s) to drop
* @param pos position of first argument to drop (zero for the leftmost)
* @return a method handle which drops arguments of the given types,
* before calling the original method handle
* @throws NullPointerException if the target is null,
* or if the {@code valueTypes} list or any of its elements is null
* @throws IllegalArgumentException if any element of {@code valueTypes} is {@code void.class},
* or if {@code pos} is negative or greater than the arity of the target,
* or if the new method handle's type would have too many parameters
*/
public static
MethodHandle dropArguments(MethodHandle target, int pos, List
* {@link #dropArguments(MethodHandle,int,Class...) dropArguments}{@code (target, pos, valueTypes.toArray(new Class[0]))}
*
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
MethodHandle cat = lookup().findVirtual(String.class,
"concat", methodType(String.class, String.class));
assertEquals("xy", (String) cat.invokeExact("x", "y"));
MethodHandle d0 = dropArguments(cat, 0, String.class);
assertEquals("yz", (String) d0.invokeExact("x", "y", "z"));
MethodHandle d1 = dropArguments(cat, 1, String.class);
assertEquals("xz", (String) d1.invokeExact("x", "y", "z"));
MethodHandle d2 = dropArguments(cat, 2, String.class);
assertEquals("xy", (String) d2.invokeExact("x", "y", "z"));
MethodHandle d12 = dropArguments(cat, 1, int.class, boolean.class);
assertEquals("xz", (String) d12.invokeExact("x", 12, true, "z"));
* }
* @param target the method handle to invoke after the arguments are dropped
* @param valueTypes the type(s) of the argument(s) to drop
* @param pos position of first argument to drop (zero for the leftmost)
* @return a method handle which drops arguments of the given types,
* before calling the original method handle
* @throws NullPointerException if the target is null,
* or if the {@code valueTypes} array or any of its elements is null
* @throws IllegalArgumentException if any element of {@code valueTypes} is {@code void.class},
* or if {@code pos} is negative or greater than the arity of the target,
* or if the new method handle's type would have
* too many parameters
*/
public static
MethodHandle dropArguments(MethodHandle target, int pos, Class... valueTypes) {
return dropArguments0(target, pos, copyTypes(valueTypes));
}
// private version which allows caller some freedom with error handling
private static MethodHandle dropArgumentsToMatch(MethodHandle target, int skip, List
* {@link #dropArguments(MethodHandle,int,List) dropArguments}{@code (target, pos, Arrays.asList(valueTypes))}
*
*
* Given these assumptions, the result of an invocation of {@code dropArgumentsToMatch} will have the parameter type
* list {@code S..., P..., M..., A...}, with the {@code P} and {@code A} types inserted as if by
* {@link #dropArguments(MethodHandle, int, Class[])}.
*
* @apiNote
* Two method handles whose argument lists are "effectively identical" (i.e., identical in a common prefix) may be
* mutually converted to a common type by two calls to {@code dropArgumentsToMatch}, as follows:
*
* @param target the method handle to adapt
* @param skip number of targets parameters to disregard (they will be unchanged)
* @param newTypes the list of types to match {@code target}'s parameter type list to
* @param pos place in {@code newTypes} where the non-skipped target parameters must occur
* @return a possibly adapted method handle
* @throws NullPointerException if either argument is null
* @throws IllegalArgumentException if any element of {@code newTypes} is {@code void.class},
* or if {@code skip} is negative or greater than the arity of the target,
* or if {@code pos} is negative or greater than the newTypes list size,
* or if {@code newTypes} does not contain the {@code target}'s non-skipped parameter types at position
* {@code pos}.
* @since 9
*/
public static
MethodHandle dropArgumentsToMatch(MethodHandle target, int skip, List{@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
...
MethodHandle h0 = constant(boolean.class, true);
MethodHandle h1 = lookup().findVirtual(String.class, "concat", methodType(String.class, String.class));
MethodType bigType = h1.type().insertParameterTypes(1, String.class, int.class);
MethodHandle h2 = dropArguments(h1, 0, bigType.parameterList());
if (h1.type().parameterCount() < h2.type().parameterCount())
h1 = dropArgumentsToMatch(h1, 0, h2.type().parameterList(), 0); // lengthen h1
else
h2 = dropArgumentsToMatch(h2, 0, h1.type().parameterList(), 0); // lengthen h2
MethodHandle h3 = guardWithTest(h0, h1, h2);
assertEquals("xy", h3.invoke("x", "y", 1, "a", "b", "c"));
* }
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
MethodHandle cat = lookup().findVirtual(String.class,
"concat", methodType(String.class, String.class));
MethodHandle upcase = lookup().findVirtual(String.class,
"toUpperCase", methodType(String.class));
assertEquals("xy", (String) cat.invokeExact("x", "y"));
MethodHandle f0 = filterArguments(cat, 0, upcase);
assertEquals("Xy", (String) f0.invokeExact("x", "y")); // Xy
MethodHandle f1 = filterArguments(cat, 1, upcase);
assertEquals("xY", (String) f1.invokeExact("x", "y")); // xY
MethodHandle f2 = filterArguments(cat, 0, upcase, upcase);
assertEquals("XY", (String) f2.invokeExact("x", "y")); // XY
* }
* {@code
* T target(P... p, A[i]... a[i], B... b);
* A[i] filter[i](V[i]);
* T adapter(P... p, V[i]... v[i], B... b) {
* return target(p..., filter[i](v[i])..., b...);
* }
* }
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
MethodHandle deepToString = publicLookup()
.findStatic(Arrays.class, "deepToString", methodType(String.class, Object[].class));
MethodHandle ts1 = deepToString.asCollector(String[].class, 1);
assertEquals("[strange]", (String) ts1.invokeExact("strange"));
MethodHandle ts2 = deepToString.asCollector(String[].class, 2);
assertEquals("[up, down]", (String) ts2.invokeExact("up", "down"));
MethodHandle ts3 = deepToString.asCollector(String[].class, 3);
MethodHandle ts3_ts2 = collectArguments(ts3, 1, ts2);
assertEquals("[top, [up, down], strange]",
(String) ts3_ts2.invokeExact("top", "up", "down", "strange"));
MethodHandle ts3_ts2_ts1 = collectArguments(ts3_ts2, 3, ts1);
assertEquals("[top, [up, down], [strange]]",
(String) ts3_ts2_ts1.invokeExact("top", "up", "down", "strange"));
MethodHandle ts3_ts2_ts3 = collectArguments(ts3_ts2, 1, ts3);
assertEquals("[top, [[up, down, strange], charm], bottom]",
(String) ts3_ts2_ts3.invokeExact("top", "up", "down", "strange", "charm", "bottom"));
* }
* {@code
* T target(A...,V,C...);
* V filter(B...);
* T adapter(A... a,B... b,C... c) {
* V v = filter(b...);
* return target(a...,v,c...);
* }
* // and if the filter has no arguments:
* T target2(A...,V,C...);
* V filter2();
* T adapter2(A... a,C... c) {
* V v = filter2();
* return target2(a...,v,c...);
* }
* // and if the filter has a void return:
* T target3(A...,C...);
* void filter3(B...);
* void adapter3(A... a,B... b,C... c) {
* filter3(b...);
* return target3(a...,c...);
* }
* }
* If the target method handle consumes no arguments besides than the result
* (if any) of the filter {@code coll}, then {@code collectArguments(mh, 0, coll)}
* is equivalent to {@code filterReturnValue(coll, mh)}.
* If the filter method handle {@code coll} consumes one argument and produces
* a non-void result, then {@code collectArguments(mh, N, coll)}
* is equivalent to {@code filterArguments(mh, N, coll)}.
* Other equivalences are possible but would require argument permutation.
*
* @param target the method handle to invoke after filtering the subsequence of arguments
* @param pos the position of the first adapter argument to pass to the filter,
* and/or the target argument which receives the result of the filter
* @param filter method handle to call on the subsequence of arguments
* @return method handle which incorporates the specified argument subsequence filtering logic
* @throws NullPointerException if either argument is null
* @throws IllegalArgumentException if the return type of {@code filter}
* is non-void and is not the same as the {@code pos} argument of the target,
* or if {@code pos} is not between 0 and the target's arity, inclusive,
* or if the resulting method handle's type would have
* too many parameters
* @see MethodHandles#foldArguments
* @see MethodHandles#filterArguments
* @see MethodHandles#filterReturnValue
*/
public static
MethodHandle collectArguments(MethodHandle target, int pos, MethodHandle filter) {
MethodType newType = collectArgumentsChecks(target, pos, filter);
return new Transformers.CollectArguments(target, filter, pos, newType);
}
private static MethodType collectArgumentsChecks(MethodHandle target, int pos, MethodHandle filter) throws RuntimeException {
MethodType targetType = target.type();
MethodType filterType = filter.type();
Class rtype = filterType.returnType();
List{@code
* mh = MethodHandles.dropArguments(mh, 1, coll.type().parameterList()); //step 2
* mh = MethodHandles.foldArguments(mh, coll); //step 1
* }
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
MethodHandle cat = lookup().findVirtual(String.class,
"concat", methodType(String.class, String.class));
MethodHandle length = lookup().findVirtual(String.class,
"length", methodType(int.class));
System.out.println((String) cat.invokeExact("x", "y")); // xy
MethodHandle f0 = filterReturnValue(cat, length);
System.out.println((int) f0.invokeExact("x", "y")); // 2
* }
* {@code
* T target(A...);
* V filter(T);
* V adapter(A... a) {
* T t = target(a...);
* return filter(t);
* }
* // and if the target has a void return:
* void target2(A...);
* V filter2();
* V adapter2(A... a) {
* target2(a...);
* return filter2();
* }
* // and if the filter has a void return:
* T target3(A...);
* void filter3(V);
* void adapter3(A... a) {
* T t = target3(a...);
* filter3(t);
* }
* }
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
MethodHandle trace = publicLookup().findVirtual(java.io.PrintStream.class,
"println", methodType(void.class, String.class))
.bindTo(System.out);
MethodHandle cat = lookup().findVirtual(String.class,
"concat", methodType(String.class, String.class));
assertEquals("boojum", (String) cat.invokeExact("boo", "jum"));
MethodHandle catTrace = foldArguments(cat, trace);
// also prints "boo":
assertEquals("boojum", (String) catTrace.invokeExact("boo", "jum"));
* }
* {@code
* // there are N arguments in A...
* T target(V, A[N]..., B...);
* V combiner(A...);
* T adapter(A... a, B... b) {
* V v = combiner(a...);
* return target(v, a..., b...);
* }
* // and if the combiner has a void return:
* T target2(A[N]..., B...);
* void combiner2(A...);
* T adapter2(A... a, B... b) {
* combiner2(a...);
* return target2(a..., b...);
* }
* }
* {@code
import static java.lang.invoke.MethodHandles.*;
import static java.lang.invoke.MethodType.*;
...
MethodHandle trace = publicLookup().findVirtual(java.io.PrintStream.class,
"println", methodType(void.class, String.class))
.bindTo(System.out);
MethodHandle cat = lookup().findVirtual(String.class,
"concat", methodType(String.class, String.class));
assertEquals("boojum", (String) cat.invokeExact("boo", "jum"));
MethodHandle catTrace = foldArguments(cat, 1, trace);
// also prints "jum":
assertEquals("boojum", (String) catTrace.invokeExact("boo", "jum"));
* }
* {@code
* // there are N arguments in A...
* T target(Z..., V, A[N]..., B...);
* V combiner(A...);
* T adapter(Z... z, A... a, B... b) {
* V v = combiner(a...);
* return target(z..., v, a..., b...);
* }
* // and if the combiner has a void return:
* T target2(Z..., A[N]..., B...);
* void combiner2(A...);
* T adapter2(Z... z, A... a, B... b) {
* combiner2(a...);
* return target2(z..., a..., b...);
* }
* }
* Note that the test arguments ({@code a...} in the pseudocode) cannot
* be modified by execution of the test, and so are passed unchanged
* from the caller to the target or fallback as appropriate.
* @param test method handle used for test, must return boolean
* @param target method handle to call if test passes
* @param fallback method handle to call if test fails
* @return method handle which incorporates the specified if/then/else logic
* @throws NullPointerException if any argument is null
* @throws IllegalArgumentException if {@code test} does not return boolean,
* or if all three method types do not match (with the return
* type of {@code test} changed to match that of the target).
*/
public static
MethodHandle guardWithTest(MethodHandle test,
MethodHandle target,
MethodHandle fallback) {
MethodType gtype = test.type();
MethodType ttype = target.type();
MethodType ftype = fallback.type();
if (!ttype.equals(ftype))
throw misMatchedTypes("target and fallback types", ttype, ftype);
if (gtype.returnType() != boolean.class)
throw newIllegalArgumentException("guard type is not a predicate "+gtype);
List{@code
* boolean test(A...);
* T target(A...,B...);
* T fallback(A...,B...);
* T adapter(A... a,B... b) {
* if (test(a...))
* return target(a..., b...);
* else
* return fallback(a..., b...);
* }
* }
* Note that the saved arguments ({@code a...} in the pseudocode) cannot
* be modified by execution of the target, and so are passed unchanged
* from the caller to the handler, if the handler is invoked.
* {@code
* T target(A..., B...);
* T handler(ExType, A...);
* T adapter(A... a, B... b) {
* try {
* return target(a..., b...);
* } catch (ExType ex) {
* return handler(ex, a...);
* }
* }
* }
*
* The full sequence of all iteration variable types, in clause order, will be notated as {@code (V...)}.
* The values themselves will be {@code (v...)}. When we speak of "parameter lists", we will usually
* be referring to types, but in some contexts (describing execution) the lists will be of actual values.
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
* Note that the parameter type lists {@code (V...)} and {@code (A...)} have been expanded
* to their full length, even though individual clause functions may neglect to take them all.
* As noted above, missing parameters are filled in as if by {@link #dropArgumentsToMatch(MethodHandle, int, List, int)}.
*
* @apiNote Example:
* {@code
* V... init...(A...);
* boolean pred...(V..., A...);
* V... step...(V..., A...);
* R fini...(V..., A...);
* R loop(A... a) {
* V... v... = init...(a...);
* for (;;) {
* for ((v, p, s, f) in (v..., pred..., step..., fini...)) {
* v = s(v..., a...);
* if (!p(v..., a...)) {
* return f(v..., a...);
* }
* }
* }
* }
* }
* The same example, dropping arguments and using combinators:
* {@code
* // iterative implementation of the factorial function as a loop handle
* static int one(int k) { return 1; }
* static int inc(int i, int acc, int k) { return i + 1; }
* static int mult(int i, int acc, int k) { return i * acc; }
* static boolean pred(int i, int acc, int k) { return i < k; }
* static int fin(int i, int acc, int k) { return acc; }
* // assume MH_one, MH_inc, MH_mult, MH_pred, and MH_fin are handles to the above methods
* // null initializer for counter, should initialize to 0
* MethodHandle[] counterClause = new MethodHandle[]{null, MH_inc};
* MethodHandle[] accumulatorClause = new MethodHandle[]{MH_one, MH_mult, MH_pred, MH_fin};
* MethodHandle loop = MethodHandles.loop(counterClause, accumulatorClause);
* assertEquals(120, loop.invoke(5));
* }
* A similar example, using a helper object to hold a loop parameter:
* {@code
* // simplified implementation of the factorial function as a loop handle
* static int inc(int i) { return i + 1; } // drop acc, k
* static int mult(int i, int acc) { return i * acc; } //drop k
* static boolean cmp(int i, int k) { return i < k; }
* // assume MH_inc, MH_mult, and MH_cmp are handles to the above methods
* // null initializer for counter, should initialize to 0
* MethodHandle MH_one = MethodHandles.constant(int.class, 1);
* MethodHandle MH_pred = MethodHandles.dropArguments(MH_cmp, 1, int.class); // drop acc
* MethodHandle MH_fin = MethodHandles.dropArguments(MethodHandles.identity(int.class), 0, int.class); // drop i
* MethodHandle[] counterClause = new MethodHandle[]{null, MH_inc};
* MethodHandle[] accumulatorClause = new MethodHandle[]{MH_one, MH_mult, MH_pred, MH_fin};
* MethodHandle loop = MethodHandles.loop(counterClause, accumulatorClause);
* assertEquals(720, loop.invoke(6));
* }
*
* @param clauses an array of arrays (4-tuples) of {@link MethodHandle}s adhering to the rules described above.
*
* @return a method handle embodying the looping behavior as defined by the arguments.
*
* @throws IllegalArgumentException in case any of the constraints described above is violated.
*
* @see MethodHandles#whileLoop(MethodHandle, MethodHandle, MethodHandle)
* @see MethodHandles#doWhileLoop(MethodHandle, MethodHandle, MethodHandle)
* @see MethodHandles#countedLoop(MethodHandle, MethodHandle, MethodHandle)
* @see MethodHandles#iteratedLoop(MethodHandle, MethodHandle, MethodHandle)
* @since 9
*/
public static MethodHandle loop(MethodHandle[]... clauses) {
// Step 0: determine clause structure.
loopChecks0(clauses);
List{@code
* // instance-based implementation of the factorial function as a loop handle
* static class FacLoop {
* final int k;
* FacLoop(int k) { this.k = k; }
* int inc(int i) { return i + 1; }
* int mult(int i, int acc) { return i * acc; }
* boolean pred(int i) { return i < k; }
* int fin(int i, int acc) { return acc; }
* }
* // assume MH_FacLoop is a handle to the constructor
* // assume MH_inc, MH_mult, MH_pred, and MH_fin are handles to the above methods
* // null initializer for counter, should initialize to 0
* MethodHandle MH_one = MethodHandles.constant(int.class, 1);
* MethodHandle[] instanceClause = new MethodHandle[]{MH_FacLoop};
* MethodHandle[] counterClause = new MethodHandle[]{null, MH_inc};
* MethodHandle[] accumulatorClause = new MethodHandle[]{MH_one, MH_mult, MH_pred, MH_fin};
* MethodHandle loop = MethodHandles.loop(instanceClause, counterClause, accumulatorClause);
* assertEquals(5040, loop.invoke(7));
* }
*
*
*
*
*
* @apiNote Example:
* {@code
* V init(A...);
* boolean pred(V, A...);
* V body(V, A...);
* V whileLoop(A... a...) {
* V v = init(a...);
* while (pred(v, a...)) {
* v = body(v, a...);
* }
* return v;
* }
* }
*
*
* @apiNote The implementation of this method can be expressed as follows:
* {@code
* // implement the zip function for lists as a loop handle
* static List
*
* @param init optional initializer, providing the initial value of the loop variable.
* May be {@code null}, implying a default initial value. See above for other constraints.
* @param pred condition for the loop, which may not be {@code null}. Its result type must be {@code boolean}. See
* above for other constraints.
* @param body body of the loop, which may not be {@code null}. It controls the loop parameters and result type.
* See above for other constraints.
*
* @return a method handle implementing the {@code while} loop as described by the arguments.
* @throws IllegalArgumentException if the rules for the arguments are violated.
* @throws NullPointerException if {@code pred} or {@code body} are {@code null}.
*
* @see #loop(MethodHandle[][])
* @see #doWhileLoop(MethodHandle, MethodHandle, MethodHandle)
* @since 9
*/
public static MethodHandle whileLoop(MethodHandle init, MethodHandle pred, MethodHandle body) {
whileLoopChecks(init, pred, body);
MethodHandle fini = identityOrVoid(body.type().returnType());
MethodHandle[] checkExit = { null, null, pred, fini };
MethodHandle[] varBody = { init, body };
return loop(checkExit, varBody);
}
/**
* Constructs a {@code do-while} loop from an initializer, a body, and a predicate.
* This is a convenience wrapper for the {@linkplain #loop(MethodHandle[][]) generic loop combinator}.
* {@code
* MethodHandle whileLoop(MethodHandle init, MethodHandle pred, MethodHandle body) {
* MethodHandle fini = (body.type().returnType() == void.class
* ? null : identity(body.type().returnType()));
* MethodHandle[]
* checkExit = { null, null, pred, fini },
* varBody = { init, body };
* return loop(checkExit, varBody);
* }
* }
*
*
*
*
*
* @apiNote Example:
* {@code
* V init(A...);
* boolean pred(V, A...);
* V body(V, A...);
* V doWhileLoop(A... a...) {
* V v = init(a...);
* do {
* v = body(v, a...);
* } while (pred(v, a...));
* return v;
* }
* }
*
*
* @apiNote The implementation of this method can be expressed as follows:
* {@code
* // int i = 0; while (i < limit) { ++i; } return i; => limit
* static int zero(int limit) { return 0; }
* static int step(int i, int limit) { return i + 1; }
* static boolean pred(int i, int limit) { return i < limit; }
* // assume MH_zero, MH_step, and MH_pred are handles to the above methods
* MethodHandle loop = MethodHandles.doWhileLoop(MH_zero, MH_step, MH_pred);
* assertEquals(23, loop.invoke(23));
* }
*
* @param init optional initializer, providing the initial value of the loop variable.
* May be {@code null}, implying a default initial value. See above for other constraints.
* @param body body of the loop, which may not be {@code null}. It controls the loop parameters and result type.
* See above for other constraints.
* @param pred condition for the loop, which may not be {@code null}. Its result type must be {@code boolean}. See
* above for other constraints.
*
* @return a method handle implementing the {@code while} loop as described by the arguments.
* @throws IllegalArgumentException if the rules for the arguments are violated.
* @throws NullPointerException if {@code pred} or {@code body} are {@code null}.
*
* @see #loop(MethodHandle[][])
* @see #whileLoop(MethodHandle, MethodHandle, MethodHandle)
* @since 9
*/
public static MethodHandle doWhileLoop(MethodHandle init, MethodHandle body, MethodHandle pred) {
whileLoopChecks(init, pred, body);
MethodHandle fini = identityOrVoid(body.type().returnType());
MethodHandle[] clause = {init, body, pred, fini };
return loop(clause);
}
private static void whileLoopChecks(MethodHandle init, MethodHandle pred, MethodHandle body) {
Objects.requireNonNull(pred);
Objects.requireNonNull(body);
MethodType bodyType = body.type();
Class returnType = bodyType.returnType();
List{@code
* MethodHandle doWhileLoop(MethodHandle init, MethodHandle body, MethodHandle pred) {
* MethodHandle fini = (body.type().returnType() == void.class
* ? null : identity(body.type().returnType()));
* MethodHandle[] clause = { init, body, pred, fini };
* return loop(clause);
* }
* }
*
*
*
*
*
* @apiNote Example with a fully conformant body method:
* {@code
* int iterations(A...);
* V init(A...);
* V body(V, int, A...);
* V countedLoop(A... a...) {
* int end = iterations(a...);
* V v = init(a...);
* for (int i = 0; i < end; ++i) {
* v = body(v, i, a...);
* }
* return v;
* }
* }
*
* @apiNote Example with the simplest possible body method type,
* and passing the number of iterations to the loop invocation:
* {@code
* // String s = "Lambdaman!"; for (int i = 0; i < 13; ++i) { s = "na " + s; } return s;
* // => a variation on a well known theme
* static String step(String v, int counter, String init) { return "na " + v; }
* // assume MH_step is a handle to the method above
* MethodHandle fit13 = MethodHandles.constant(int.class, 13);
* MethodHandle start = MethodHandles.identity(String.class);
* MethodHandle loop = MethodHandles.countedLoop(fit13, start, MH_step);
* assertEquals("na na na na na na na na na na na na na Lambdaman!", loop.invoke("Lambdaman!"));
* }
*
* @apiNote Example that treats the number of iterations, string to append to, and string to append
* as loop parameters:
* {@code
* // String s = "Lambdaman!"; for (int i = 0; i < 13; ++i) { s = "na " + s; } return s;
* // => a variation on a well known theme
* static String step(String v, int counter ) { return "na " + v; }
* // assume MH_step is a handle to the method above
* MethodHandle count = MethodHandles.dropArguments(MethodHandles.identity(int.class), 1, String.class);
* MethodHandle start = MethodHandles.dropArguments(MethodHandles.identity(String.class), 0, int.class);
* MethodHandle loop = MethodHandles.countedLoop(count, start, MH_step); // (v, i) -> "na " + v
* assertEquals("na na na na na na na na na na na na na Lambdaman!", loop.invoke(13, "Lambdaman!"));
* }
*
* @apiNote Example that illustrates the usage of {@link #dropArgumentsToMatch(MethodHandle, int, List, int)}
* to enforce a loop type:
* {@code
* // String s = "Lambdaman!", t = "na"; for (int i = 0; i < 13; ++i) { s = t + " " + s; } return s;
* // => a variation on a well known theme
* static String step(String v, int counter, int iterations_, String pre, String start_) { return pre + " " + v; }
* // assume MH_step is a handle to the method above
* MethodHandle count = MethodHandles.identity(int.class);
* MethodHandle start = MethodHandles.dropArguments(MethodHandles.identity(String.class), 0, int.class, String.class);
* MethodHandle loop = MethodHandles.countedLoop(count, start, MH_step); // (v, i, _, pre, _) -> pre + " " + v
* assertEquals("na na na na na na na na na na na na na Lambdaman!", loop.invoke(13, "na", "Lambdaman!"));
* }
*
* @apiNote The implementation of this method can be expressed as follows:
* {@code
* // String s = "Lambdaman!", t = "na"; for (int i = 0; i < 13; ++i) { s = t + " " + s; } return s;
* // => a variation on a well known theme
* static String step(String v, int counter, String pre) { return pre + " " + v; }
* // assume MH_step is a handle to the method above
* MethodType loopType = methodType(String.class, String.class, int.class, String.class);
* MethodHandle count = MethodHandles.dropArgumentsToMatch(MethodHandles.identity(int.class), 0, loopType.parameterList(), 1);
* MethodHandle start = MethodHandles.dropArgumentsToMatch(MethodHandles.identity(String.class), 0, loopType.parameterList(), 2);
* MethodHandle body = MethodHandles.dropArgumentsToMatch(MH_step, 2, loopType.parameterList(), 0);
* MethodHandle loop = MethodHandles.countedLoop(count, start, body); // (v, i, pre, _, _) -> pre + " " + v
* assertEquals("na na na na na na na na na na na na na Lambdaman!", loop.invoke("na", 13, "Lambdaman!"));
* }
*
* @param iterations a non-{@code null} handle to return the number of iterations this loop should run. The handle's
* result type must be {@code int}. See above for other constraints.
* @param init optional initializer, providing the initial value of the loop variable.
* May be {@code null}, implying a default initial value. See above for other constraints.
* @param body body of the loop, which may not be {@code null}.
* It controls the loop parameters and result type in the standard case (see above for details).
* It must accept its own return type (if non-void) plus an {@code int} parameter (for the counter),
* and may accept any number of additional types.
* See above for other constraints.
*
* @return a method handle representing the loop.
* @throws NullPointerException if either of the {@code iterations} or {@code body} handles is {@code null}.
* @throws IllegalArgumentException if any argument violates the rules formulated above.
*
* @see #countedLoop(MethodHandle, MethodHandle, MethodHandle, MethodHandle)
* @since 9
*/
public static MethodHandle countedLoop(MethodHandle iterations, MethodHandle init, MethodHandle body) {
return countedLoop(empty(iterations.type()), iterations, init, body);
}
/**
* Constructs a loop that counts over a range of numbers.
* This is a convenience wrapper for the {@linkplain #loop(MethodHandle[][]) generic loop combinator}.
* {@code
* MethodHandle countedLoop(MethodHandle iterations, MethodHandle init, MethodHandle body) {
* return countedLoop(empty(iterations.type()), iterations, init, body);
* }
* }
*
*
*
*
*
* @apiNote The implementation of this method can be expressed as follows:
* {@code
* int start(A...);
* int end(A...);
* V init(A...);
* V body(V, int, A...);
* V countedLoop(A... a...) {
* int e = end(a...);
* int s = start(a...);
* V v = init(a...);
* for (int i = s; i < e; ++i) {
* v = body(v, i, a...);
* }
* return v;
* }
* }
*
* @param start a non-{@code null} handle to return the start value of the loop counter, which must be {@code int}.
* See above for other constraints.
* @param end a non-{@code null} handle to return the end value of the loop counter (the loop will run to
* {@code end-1}). The result type must be {@code int}. See above for other constraints.
* @param init optional initializer, providing the initial value of the loop variable.
* May be {@code null}, implying a default initial value. See above for other constraints.
* @param body body of the loop, which may not be {@code null}.
* It controls the loop parameters and result type in the standard case (see above for details).
* It must accept its own return type (if non-void) plus an {@code int} parameter (for the counter),
* and may accept any number of additional types.
* See above for other constraints.
*
* @return a method handle representing the loop.
* @throws NullPointerException if any of the {@code start}, {@code end}, or {@code body} handles is {@code null}.
* @throws IllegalArgumentException if any argument violates the rules formulated above.
*
* @see #countedLoop(MethodHandle, MethodHandle, MethodHandle)
* @since 9
*/
public static MethodHandle countedLoop(MethodHandle start, MethodHandle end, MethodHandle init, MethodHandle body) {
countedLoopChecks(start, end, init, body);
Class counterType = start.type().returnType(); // int, but who's counting?
Class limitType = end.type().returnType(); // yes, int again
Class returnType = body.type().returnType();
// Android-changed: getConstantHandle is in MethodHandles.
// MethodHandle incr = MethodHandleImpl.getConstantHandle(MethodHandleImpl.MH_countedLoopStep);
// MethodHandle pred = MethodHandleImpl.getConstantHandle(MethodHandleImpl.MH_countedLoopPred);
MethodHandle incr = getConstantHandle(MH_countedLoopStep);
MethodHandle pred = getConstantHandle(MH_countedLoopPred);
MethodHandle retv = null;
if (returnType != void.class) {
incr = dropArguments(incr, 1, returnType); // (limit, v, i) => (limit, i)
pred = dropArguments(pred, 1, returnType); // ditto
retv = dropArguments(identity(returnType), 0, counterType);
}
body = dropArguments(body, 0, counterType); // ignore the limit variable
MethodHandle[]
loopLimit = { end, null, pred, retv }, // limit = end(); i < limit || return v
bodyClause = { init, body }, // v = init(); v = body(v, i)
indexVar = { start, incr }; // i = start(); i = i + 1
return loop(loopLimit, bodyClause, indexVar);
}
private static void countedLoopChecks(MethodHandle start, MethodHandle end, MethodHandle init, MethodHandle body) {
Objects.requireNonNull(start);
Objects.requireNonNull(end);
Objects.requireNonNull(body);
Class counterType = start.type().returnType();
if (counterType != int.class) {
MethodType expected = start.type().changeReturnType(int.class);
throw misMatchedTypes("start function", start.type(), expected);
} else if (end.type().returnType() != counterType) {
MethodType expected = end.type().changeReturnType(counterType);
throw misMatchedTypes("end function", end.type(), expected);
}
MethodType bodyType = body.type();
Class returnType = bodyType.returnType();
List{@code
* MethodHandle countedLoop(MethodHandle start, MethodHandle end, MethodHandle init, MethodHandle body) {
* MethodHandle returnVar = dropArguments(identity(init.type().returnType()), 0, int.class, int.class);
* // assume MH_increment and MH_predicate are handles to implementation-internal methods with
* // the following semantics:
* // MH_increment: (int limit, int counter) -> counter + 1
* // MH_predicate: (int limit, int counter) -> counter < limit
* Class counterType = start.type().returnType(); // int
* Class returnType = body.type().returnType();
* MethodHandle incr = MH_increment, pred = MH_predicate, retv = null;
* if (returnType != void.class) { // ignore the V variable
* incr = dropArguments(incr, 1, returnType); // (limit, v, i) => (limit, i)
* pred = dropArguments(pred, 1, returnType); // ditto
* retv = dropArguments(identity(returnType), 0, counterType); // ignore limit
* }
* body = dropArguments(body, 0, counterType); // ignore the limit variable
* MethodHandle[]
* loopLimit = { end, null, pred, retv }, // limit = end(); i < limit || return v
* bodyClause = { init, body }, // v = init(); v = body(v, i)
* indexVar = { start, incr }; // i = start(); i = i + 1
* return loop(loopLimit, bodyClause, indexVar);
* }
* }
*
*
*
*
*
* @apiNote Example:
* {@code
* Iterator
*
* @apiNote The implementation of this method can be expressed approximately as follows:
* {@code
* // get an iterator from a list
* static List
*
* @param iterator an optional handle to return the iterator to start the loop.
* If non-{@code null}, the handle must return {@link java.util.Iterator} or a subtype.
* See above for other constraints.
* @param init optional initializer, providing the initial value of the loop variable.
* May be {@code null}, implying a default initial value. See above for other constraints.
* @param body body of the loop, which may not be {@code null}.
* It controls the loop parameters and result type in the standard case (see above for details).
* It must accept its own return type (if non-void) plus a {@code T} parameter (for the iterated values),
* and may accept any number of additional types.
* See above for other constraints.
*
* @return a method handle embodying the iteration loop functionality.
* @throws NullPointerException if the {@code body} handle is {@code null}.
* @throws IllegalArgumentException if any argument violates the above requirements.
*
* @since 9
*/
public static MethodHandle iteratedLoop(MethodHandle iterator, MethodHandle init, MethodHandle body) {
Class iterableType = iteratedLoopChecks(iterator, init, body);
Class returnType = body.type().returnType();
// Android-changed: getConstantHandle is in MethodHandles.
// MethodHandle hasNext = MethodHandleImpl.getConstantHandle(MethodHandleImpl.MH_iteratePred);
// MethodHandle nextRaw = MethodHandleImpl.getConstantHandle(MethodHandleImpl.MH_iterateNext);
MethodHandle hasNext = getConstantHandle(MH_iteratePred);
MethodHandle nextRaw = getConstantHandle(MH_iterateNext);
MethodHandle startIter;
MethodHandle nextVal;
{
MethodType iteratorType;
if (iterator == null) {
// derive argument type from body, if available, else use Iterable
// Android-changed: getConstantHandle is in MethodHandles.
// startIter = MethodHandleImpl.getConstantHandle(MethodHandleImpl.MH_initIterator);
startIter = getConstantHandle(MH_initIterator);
iteratorType = startIter.type().changeParameterType(0, iterableType);
} else {
// force return type to the internal iterator class
iteratorType = iterator.type().changeReturnType(Iterator.class);
startIter = iterator;
}
Class ttype = body.type().parameterType(returnType == void.class ? 0 : 1);
MethodType nextValType = nextRaw.type().changeReturnType(ttype);
// perform the asType transforms under an exception transformer, as per spec.:
try {
startIter = startIter.asType(iteratorType);
nextVal = nextRaw.asType(nextValType);
} catch (WrongMethodTypeException ex) {
throw new IllegalArgumentException(ex);
}
}
MethodHandle retv = null, step = body;
if (returnType != void.class) {
// the simple thing first: in (I V A...), drop the I to get V
retv = dropArguments(identity(returnType), 0, Iterator.class);
// body type signature (V T A...), internal loop types (I V A...)
step = swapArguments(body, 0, 1); // swap V <-> T
}
MethodHandle[]
iterVar = { startIter, null, hasNext, retv },
bodyClause = { init, filterArgument(step, 0, nextVal) };
return loop(iterVar, bodyClause);
}
private static Class iteratedLoopChecks(MethodHandle iterator, MethodHandle init, MethodHandle body) {
Objects.requireNonNull(body);
MethodType bodyType = body.type();
Class returnType = bodyType.returnType();
List{@code
* MethodHandle iteratedLoop(MethodHandle iterator, MethodHandle init, MethodHandle body) {
* // assume MH_next, MH_hasNext, MH_startIter are handles to methods of Iterator/Iterable
* Class returnType = body.type().returnType();
* Class ttype = body.type().parameterType(returnType == void.class ? 0 : 1);
* MethodHandle nextVal = MH_next.asType(MH_next.type().changeReturnType(ttype));
* MethodHandle retv = null, step = body, startIter = iterator;
* if (returnType != void.class) {
* // the simple thing first: in (I V A...), drop the I to get V
* retv = dropArguments(identity(returnType), 0, Iterator.class);
* // body type signature (V T A...), internal loop types (I V A...)
* step = swapArguments(body, 0, 1); // swap V <-> T
* }
* if (startIter == null) startIter = MH_getIter;
* MethodHandle[]
* iterVar = { startIter, null, MH_hasNext, retv }, // it = iterator; while (it.hasNext())
* bodyClause = { init, filterArguments(step, 0, nextVal) }; // v = body(v, t, a)
* return loop(iterVar, bodyClause);
* }
* }
*
*
* {@code
* V target(A..., B...);
* V cleanup(Throwable, V, A...);
* V adapter(A... a, B... b) {
* V result = (zero value for V);
* Throwable throwable = null;
* try {
* result = target(a..., b...);
* } catch (Throwable t) {
* throwable = t;
* throw t;
* } finally {
* result = cleanup(throwable, result, a...);
* }
* return result;
* }
* }
*
* @param fallback the fallback method handle that is called when the selector is not
* within the range {@code [0, N)}.
* @param targets array of target method handles.
* @return the table switch method handle.
* @throws NullPointerException if {@code fallback}, the {@code targets} array, or any
* any of the elements of the {@code targets} array are
* {@code null}.
* @throws IllegalArgumentException if the {@code targets} array is empty, if the leading
* parameter of the fallback handle or any of the target
* handles is not {@code int}, or if the types of
* the fallback handle and all of target handles are
* not the same.
*/
public static MethodHandle tableSwitch(MethodHandle fallback, MethodHandle... targets) {
Objects.requireNonNull(fallback);
Objects.requireNonNull(targets);
targets = targets.clone();
MethodType type = tableSwitchChecks(fallback, targets);
// Android-changed: use a Transformer for the implementation.
// return MethodHandleImpl.makeTableSwitch(type, fallback, targets);
return new Transformers.TableSwitch(type, fallback, targets);
}
private static MethodType tableSwitchChecks(MethodHandle defaultCase, MethodHandle[] caseActions) {
if (caseActions.length == 0)
throw new IllegalArgumentException("Not enough cases: " + Arrays.toString(caseActions));
MethodType expectedType = defaultCase.type();
if (!(expectedType.parameterCount() >= 1) || expectedType.parameterType(0) != int.class)
throw new IllegalArgumentException(
"Case actions must have int as leading parameter: " + Arrays.toString(caseActions));
for (MethodHandle mh : caseActions) {
Objects.requireNonNull(mh);
// Android-changed: MethodType's not interned.
// if (mh.type() != expectedType)
if (!mh.type().equals(expectedType))
throw new IllegalArgumentException(
"Case actions must have the same type: " + Arrays.toString(caseActions));
}
return expectedType;
}
// BEGIN Android-added: Code from OpenJDK's MethodHandleImpl.
/**
* This method is bound as the predicate in {@linkplain MethodHandles#countedLoop(MethodHandle, MethodHandle,
* MethodHandle) counting loops}.
*
* @param limit the upper bound of the parameter, statically bound at loop creation time.
* @param counter the counter parameter, passed in during loop execution.
*
* @return whether the counter has reached the limit.
* @hide
*/
public static boolean countedLoopPredicate(int limit, int counter) {
return counter < limit;
}
/**
* This method is bound as the step function in {@linkplain MethodHandles#countedLoop(MethodHandle, MethodHandle,
* MethodHandle) counting loops} to increment the counter.
*
* @param limit the upper bound of the loop counter (ignored).
* @param counter the loop counter.
*
* @return the loop counter incremented by 1.
* @hide
*/
public static int countedLoopStep(int limit, int counter) {
return counter + 1;
}
/**
* This is bound to initialize the loop-local iterator in {@linkplain MethodHandles#iteratedLoop iterating loops}.
*
* @param it the {@link Iterable} over which the loop iterates.
*
* @return an {@link Iterator} over the argument's elements.
* @hide
*/
public static Iterator initIterator(Iterable it) {
return it.iterator();
}
/**
* This method is bound as the predicate in {@linkplain MethodHandles#iteratedLoop iterating loops}.
*
* @param it the iterator to be checked.
*
* @return {@code true} iff there are more elements to iterate over.
* @hide
*/
public static boolean iteratePredicate(Iterator it) {
return it.hasNext();
}
/**
* This method is bound as the step for retrieving the current value from the iterator in {@linkplain
* MethodHandles#iteratedLoop iterating loops}.
*
* @param it the iterator.
*
* @return the next element from the iterator.
* @hide
*/
public static Object iterateNext(Iterator it) {
return it.next();
}
// Indexes into constant method handles:
static final int
MH_cast = 0,
MH_selectAlternative = 1,
MH_copyAsPrimitiveArray = 2,
MH_fillNewTypedArray = 3,
MH_fillNewArray = 4,
MH_arrayIdentity = 5,
MH_countedLoopPred = 6,
MH_countedLoopStep = 7,
MH_initIterator = 8,
MH_iteratePred = 9,
MH_iterateNext = 10,
MH_Array_newInstance = 11,
MH_LIMIT = 12;
static MethodHandle getConstantHandle(int idx) {
MethodHandle handle = HANDLES[idx];
if (handle != null) {
return handle;
}
return setCachedHandle(idx, makeConstantHandle(idx));
}
private static synchronized MethodHandle setCachedHandle(int idx, final MethodHandle method) {
// Simulate a CAS, to avoid racy duplication of results.
MethodHandle prev = HANDLES[idx];
if (prev != null) {
return prev;
}
HANDLES[idx] = method;
return method;
}
// Local constant method handles:
private static final @Stable MethodHandle[] HANDLES = new MethodHandle[MH_LIMIT];
private static MethodHandle makeConstantHandle(int idx) {
try {
// Android-added: local IMPL_LOOKUP.
final Lookup IMPL_LOOKUP = MethodHandles.Lookup.IMPL_LOOKUP;
switch (idx) {
// Android-removed: not-used.
/*
case MH_cast:
return IMPL_LOOKUP.findVirtual(Class.class, "cast",
MethodType.methodType(Object.class, Object.class));
case MH_copyAsPrimitiveArray:
return IMPL_LOOKUP.findStatic(MethodHandleImpl.class, "copyAsPrimitiveArray",
MethodType.methodType(Object.class, Wrapper.class, Object[].class));
case MH_arrayIdentity:
return IMPL_LOOKUP.findStatic(MethodHandleImpl.class, "identity",
MethodType.methodType(Object[].class, Object[].class));
case MH_fillNewArray:
return IMPL_LOOKUP.findStatic(MethodHandleImpl.class, "fillNewArray",
MethodType.methodType(Object[].class, Integer.class, Object[].class));
case MH_fillNewTypedArray:
return IMPL_LOOKUP.findStatic(MethodHandleImpl.class, "fillNewTypedArray",
MethodType.methodType(Object[].class, Object[].class, Integer.class, Object[].class));
case MH_selectAlternative:
return IMPL_LOOKUP.findStatic(MethodHandleImpl.class, "selectAlternative",
MethodType.methodType(MethodHandle.class, boolean.class, MethodHandle.class, MethodHandle.class));
*/
case MH_countedLoopPred:
// Android-changed: methods moved to this file.
// return IMPL_LOOKUP.findStatic(MethodHandleImpl.class, "countedLoopPredicate",
// MethodType.methodType(boolean.class, int.class, int.class));
return IMPL_LOOKUP.findStatic(MethodHandles.class, "countedLoopPredicate",
MethodType.methodType(boolean.class, int.class, int.class));
case MH_countedLoopStep:
// Android-changed: methods moved to this file.
// return IMPL_LOOKUP.findStatic(MethodHandleImpl.class, "countedLoopStep",
// MethodType.methodType(int.class, int.class, int.class));
return IMPL_LOOKUP.findStatic(MethodHandles.class, "countedLoopStep",
MethodType.methodType(int.class, int.class, int.class));
case MH_initIterator:
// Android-changed: methods moved to this file.
// return IMPL_LOOKUP.findStatic(MethodHandleImpl.class, "initIterator",
// MethodType.methodType(Iterator.class, Iterable.class));
return IMPL_LOOKUP.findStatic(MethodHandles.class, "initIterator",
MethodType.methodType(Iterator.class, Iterable.class));
case MH_iteratePred:
// Android-changed: methods moved to this file.
// return IMPL_LOOKUP.findStatic(MethodHandleImpl.class, "iteratePredicate",
// MethodType.methodType(boolean.class, Iterator.class));
return IMPL_LOOKUP.findStatic(MethodHandles.class, "iteratePredicate",
MethodType.methodType(boolean.class, Iterator.class));
case MH_iterateNext:
// Android-changed: methods moved to this file.
// return IMPL_LOOKUP.findStatic(MethodHandleImpl.class, "iterateNext",
// MethodType.methodType(Object.class, Iterator.class));
return IMPL_LOOKUP.findStatic(MethodHandles.class, "iterateNext",
MethodType.methodType(Object.class, Iterator.class));
// Android-removed: not-used.
/*
case MH_Array_newInstance:
return IMPL_LOOKUP.findStatic(Array.class, "newInstance",
MethodType.methodType(Object.class, Class.class, int.class));
*/
}
} catch (ReflectiveOperationException ex) {
throw newInternalError(ex);
}
throw newInternalError("Unknown function index: " + idx);
}
// END Android-added: Code from OpenJDK's MethodHandleImpl.
}
{@code
* MethodHandles.Lookup lookup = MethodHandles.lookup();
* MethodHandle caseMh = lookup.findVirtual(String.class, "concat",
* MethodType.methodType(String.class, String.class));
* caseMh = MethodHandles.dropArguments(caseMh, 0, int.class);
*
* MethodHandle caseDefault = MethodHandles.insertArguments(caseMh, 1, "default: ");
* MethodHandle case0 = MethodHandles.insertArguments(caseMh, 1, "case 0: ");
* MethodHandle case1 = MethodHandles.insertArguments(caseMh, 1, "case 1: ");
*
* MethodHandle mhSwitch = MethodHandles.tableSwitch(
* caseDefault,
* case0,
* case1
* );
*
* assertEquals("default: data", (String) mhSwitch.invokeExact(-1, "data"));
* assertEquals("case 0: data", (String) mhSwitch.invokeExact(0, "data"));
* assertEquals("case 1: data", (String) mhSwitch.invokeExact(1, "data"));
* assertEquals("default: data", (String) mhSwitch.invokeExact(2, "data"));
* }